LCP-06014A-5
【Note5-7】Selection for synchronizing signal and data signal timing(clock timing)
SMPSYNC
Selection for Vertical/ Horizontal synchronizing
signal timing(clock timing)
SMPDATA
Selection for Red,Green and Blue data signal
timing(clock timing)
High Rise edge of clock(CLKIN)
High
Rise edge of clock(CLKIN)
Low Fall edge of clock(CLKIN)
Low
Fall edge of clock(CLKIN)
(6)Absolute Maximum Ratings
Table 3
Parameter Symbol
Condition
Ratings Unit Remark
Power supply (COG driver / Digital) VSHD
Ta=25℃ -0.3∼+4.0
V
Input voltage (Digital) VID
Ta=25℃ -0.3∼VSHD+0.3
V [Terminal]
Operating temperature(Panel surface)
Ｔopp − -10∼60 ℃ 【Note6-1】
Storage temperature
Ｔstg − -20∼70 ℃ 【Note6-1】
LED current
I
L
Ta=25℃
30 mA
【Note6-2】
[Terminal] INI,VSYNC,HSYNC,MO,UD,LR,CLK,R0∼R5,G0∼G5,B0∼B5,DEN,RESB
【Note6-1】Humidity: 95%RH Max.(at Ta ≦ 40℃). Maximum wet-bulb temperature is less than
39℃ (at Ta > 40℃). Condensation of dew must be avoided.
【Note6-2】(
Provisional plan) LED current should be as per below figure.
Ambient Temperature vs.
LED Current
0
5
10
15
20
25
30
35
0 10203040506070
Ambient temperature[℃]
LED current[mA]
(7)Electrical characteristics
7-1) Recommended operating conditions
A) TFT-LCD panel driving section
Table4 GND=0V
Parameter Symbol Min. Typ. Max. Unit Remarks
Supply voltage
for COG driver
Digital VSHD +3.0 +3.3 +3.6 V
Input voltage (Low) VILS GND - 0.2VSHD V
【Note 7-1】
Input voltage (High) VIHS 0.8VSHD - VSHD V
【Note 7-1】
Input current (Low) IILS - - 10 µA
【Note 7-1】
Input current (High) IIHS - - 10 µA
【Note 7-1】
