DS600 ±0.5°C Accurate Analog-Output Temperature Sensor
Figure 2. Output Voltage Characteristic
THERMOSTAT OPERATION
The DS600 can also be used as a thermostat with either an active-high (TO) or active-low (TO) output. To function
as a thermostat, a precise voltage reference equal to the desired threshold must be applied to the V
TH
pin. When
the temperature with the equivalent voltage value is reached (voltage on V
OUT
= voltage on V
TH
), thermostat outputs
TO and TObecome active. Figure 3 shows an example thermostat application circuit.
Figure 3. Thermostat Application Circuit
80
0
100
-40
120
60
40
20
-20
0.2
0.6
1
1.4
DS600 OUTPUT CHARACTERISTIC
TEMPERATURE (°C)
V
OUT
(V)
509mV
2.7V to 5.5V
V
DD
GND
TO
TO
V
OUT
V
TH
SD
CTG
500 KΩ
MAX6007A
DS600
PAD
4 of 5
DS600 ±0.5°C Accurate Analog-Output Temperature Sensor
PACKAGE INFORMATION
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown
in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000
