DF5-1822/CR-HT(61)

B123
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
DF5 Series
Features
1. Potting Product
This connector is capable of potting 9mm maximum, and
22.5mm mounting height is a low profile. (Fig.1)
2. Prevent Mis-insertion
When the socket and pin header are mated, this connector
is equipped with a mechanism to prevent reverse insertion
or dissimilar contact insertion.
3. Means to Prevent Solder Cracks
The pin header employs glass enforced resin, and takes
countermeasures to prevent solder cracks due to heat
shrinkage.
4. Prevent Reverse Insertion in Printed Board
Boss is added to the pin header, and prevents reverse
insertion in the printed board.
5. Full Lock Mechanism
The outer lock system employs full lock mechanism.
6. Current Capacity of 8A
Power can be supplied at 8A maximum. Specification will
change according to applicable cable, number of contacts,
number of rows. For further information, refer to product
specifications as listed on next page.
7. UL and C-UL Certified
8.
Glow Wire Compliance (Compliant with IEC 60695-2-11)
Fig.1-1
Single row type
Fig.1-2
Double row type
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
B124
DF5 Series5mm Pitch Miniature Potting Connectors for Secondary Power Supply
Product Specifications
Item Specification Condition
1.
Insulation Resistance
1000MΩ min. 500V DC
2.
Withstanding voltage
No flashover or insulation breakdown.
1500V AC/1 minute
3.
Contact Resistance
30mΩ max. 100mA
4.
Single Insertior/
0.3N (30gt) min., 4.5N (450gt) max. Measured with 1.14±0.002mm steel pin
Extraction Force
5.Vibration
No electrical discontinuity of 10μs or more
Frequency : 10 to 55 Hz, single amplitude of 0.75mm, 2 hours in each of the 3 directions.
6.
Humidity (Steady state)
Contact resistance : 30mΩ max., Insulation resistance : 500M Ω min.
96 hours at temperature of 40ç and humidity of 90% to 95%
7
.
Temperature Cycle
Contact resistance : 30mΩ max., Insulation resistance : 1000M Ω min.
(55ç : 30 minutes
15 to 35ç : 10 minutes
85ç : 30 minutes
5 to 35ç : 10 minutes ) 5 cycles
8.
Durability (Mating/un-mating)
Contact resistance : 30mΩ max. 30 cycles
9.
Resistance to
No deformation of
Flow : 260ç for 10 seconds
Soldering heat
components affecting performance.
Manual soldering : 350ç for 3 seconds
Product Part Material Finish
Remarks
Crimping Socket Insulator Polyamide White UL94V-0
Crimping Contact for Socket
Contact Phosphor bronze Tin plated --------------------
Pin header
Insulator Polyamide Beige UL94V-0
Contact Brass Tin plated --------------------
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
Materials / Finish
Product Number Structure
Connector
Contact
No. of rows
No. of contacts
18 AWG 20 AWG 22 AWG
Single row
2 to 10
Operating Temperature Range
35 to +85ç(Note 1)
48A
Operating Moisture Range
40 to 80%
65A
Rating
Current rating
8
6A
Double row
10
12 7A
Storage Temperature Range
10 to +60ç(Note 2)14 4A
Storage Humidity Range
40 to 70%(Note 2)16
5A
Voltage rating
AC/DC 500V
AC/DC 500V
UL/C-UL File No. and Recognition No.
UL : E52653
C-UL : E52653
Specification
UL/C-UL
Contact Pitch : 5mm
Contact type
C : Crimping Socket
DSA: Straight pin header
Series Name : DF5A
N
umber of contacts
: Single row : 2 to 10
Double row
: 4 to 16
Connector type
S : Single row socket
DS : Double row socket
P : Single row header
DP : Double row header
packaging type
SCF: Socket contact / reel
SC : Socket contact / pack
Applicable cable type
None : UL 1007 equivalent (jacket diameter 1.5 to 2.2mm)
A: UL 1015 equivalent (jacket diameter 2.2 to 2.9mm)
Applicable cable size
1822 : 18 to 22 AWG
DF5A - 1822 SCF
1 2 3
1
1 3
2
4
52
3
1
DF5A - * S - 5 C
2 3 4 5
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
B125
DF5 Series5mm Pitch Miniature Potting Connectors for Secondary Power Supply
Part No. HRS No.
No. of Contacts
AB
DF5A- 2S-5C 676-0007-8 2 5.0 10.5
DF5A- 3S-5C 676-0008-0 3 10.0 15.5
DF5A- 4S-5C 676-0009-3 4 15.0 20.5
DF5A- 5S-5C 676-0010-2 5 20.0 25.5
DF5A- 6S-5C 676-0011-5 6 25.0 30.5
DF5A- 7S-5C 676-0012-8 7 30.0 35.5
DF5A- 8S-5C 676-0013-0 8 35.0 40.5
DF5A- 9S-5C 676-0014-3 9 40.0 45.5
DF5A-10S-5C 676-0015-6 10 45.0 50.5
Single Row Socket
Note : A packaging quantity is delivered by
the bag unit (100 pcs.).
Single Row Pin Header
Part No. HRS No.
No. of Contacts
CD
DF5A- 2P-5DSA(35)
676-0016-9 35 2 5.0 12.5
DF5A- 3P-5DSA(35)
676-0017-1 35 3 10.0 17.5
DF5A- 4P-5DSA(35)
676-0018-4 35 4 15.0 22.5
DF5A- 5P-5DSA(35)
676-0019-7 35 5 20.0 27.5
DF5A- 6P-5DSA(35)
676-0020-6 35 6 25.0 32.5
DF5A- 7P-5DSA(35)
676-0021-9 35 7 30.0 37.5
DF5A- 8P-5DSA(35)
676-0022-1 35 8 35.0 42.5
DF5A- 9P-5DSA(35)
676-0023-4 35 9 40.0 47.5
DF5A-10P-5DSA(35)
676-0024-7 35 10 45.0 52.5
Note : A packaging quantity is delivered by
the bag unit (100 pcs.).
Contact Inserted
YES
RoHS
YES
RoHS
Contact
No. indicator
Polarity mark
BPCB mounting pattern (Board thickness = 1.6±0.1)
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

DF5-1822/CR-HT(61)

Mfr. #:
Manufacturer:
Hirose Electric
Description:
CONN TOOL HAND 18-22AWG CRIMP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union