MAX4781/MAX4782/MAX4783
High-Speed, Low-Voltage, 0.7Ω CMOS Analog
Switches/Multiplexers
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—Single +3V Supply
(V
CC
= +2.7V to +3.6V, GND = 0, V
IH
= 1.4V, V
IL
= 0.5V, T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at
T
A
= +25°C.) (Notes 2, 3)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Voltages Referenced to GND
V
CC
, A, B, C, and ENABLE ...............................-0.3V to +4.6V
Voltage at Any Other Terminal
(Note 1)...................................................-0.3V to (V
CC
+ 0.3V)
Continuous Current into A, B, C, ENABLE........................±10mA
Continuous Current into X, Y, Z, X_, Y_, Z_ ....................±150mA
Peak Current into X, Y, Z, X_, Y_, Z_
(pulsed at 1ms, 10% duty cycle)................................±300mA
Continuous Power Dissipation
16-Pin Thin QFN (derate 16.9mW/°C above +70°C) ...1349mW
16-Pin TSSOP (derate 5.7mW/°C above +70°C) ........ 457mW
Operating Temperature Range ..........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on X, Y, Z, X_, Y_, and Z_ exceeding V
CC
or GND are clamped by internal diodes. Limit forward-diode current to
maximum current rating.