MKL81Z128VMC7 Datasheet MKL81Z128VMC7, MKL81Z128VLK7, MKL81Z128VMC7R | P1-P3

TARGET APPLICATIONS

} Building control

} Home automation and security

} IoT end node

} Point-of-sale

} Portable healthcare

} Wearables

The KL8x MCU family also extends AES/DES/SHA/RSA/ECC

and tamper detection security features to the Kinetis L series

portfolio. These advancements are done while maintaining

a high level of compatibility with previous Kinetis devices.

Kinetis KL8x MCUs are performance efficient and offer

industry-leading low power while providing significant BOM

savings through smart on-chip integration. The Kinetis L series

is supported by a comprehensive set of development tools,

software and enablement.

Kinetis KL8x MCUs offer symmetric cryptographic acceleration

as a standard feature along with full-speed USB 2.0 On-The-Go

(OTG), including options for crystal-less device functionality.

The KL8x MCUs have 128 KB flash space and 96 KB SRAM. In

addition to the embedded memory resources, the integrated

QuadSPI interface supports connections to non-volatile

memory (serial NOR), allowing developers to expand beyond

the boundaries of a traditional MCU. With the extended

memory resources and new security features, developers can

safely and quickly enhance their embedded applications

with greater capability.

The KL8x MCU family offers the security, scalability, and

flexibility to address the challenges of creating smart devices

for the Internet of Tomorrow.

KINETIS KL8X MCU BENEFITS

} Optimized system integration and memory size lowering

power consumption and improving performance

} Highly compatible with the Kinetis K8x MCU family

enabling lower power and cost migration path with the

same level of security

} FlexI/O peripheral expands MCU capabilities by emulating

serial, parallel, or custom interfaces using software drivers

provided by the Kinetis SDK

} Low-power operation with dynamic currents down to

120 uA/MHz, state retention stop mode down to 3.5 uA

with fast wake-up time and lowest power mode with

only 140 nA

} Faster time to market with comprehensive enablement

solutions, including SDK (drivers, libraries, stacks), IDE,

ROM bootloader, RTOS, online community, and more

The Kinetis KL8x MCU family extends the Kinetis MCU portfolio with advanced

security capabilities including support for public key cryptography and hardware AES

acceleration with side band attack protection.

Kinetis KL8x MCU Family

Enhanced Security,

Ultra-Low Power

and Flexible

I/O Capabilities

COMPREHENSIVE ENABLEMENT SOLUTIONS

Kinetis Software Development Kit (SDK)

} Extensive suite of robust peripheral drivers, stacks

and middleware, with new support for symmetric and

asymmetric cryptographic acceleration

} Includes software examples demonstrating the usage

of the HAL, peripheral drivers, middleware and RTOSes

} Operating system abstraction (OSA) for proprietary

MQX™ RTOS, FreeRTOS, and Micrium uC/OS kernels

and baremetal (no RTOS) applications

Processor Expert Software Configuration Tool

} Complimentary software configuration tool providing

I/O allocation and pin initialization and configuration of

hardware abstraction and peripheral drivers

Integrated Development Environments (IDE)

} Atollic

TrueSTUDIO

} IAR Embedded Workbench

} ARM Keil

Microcontroller Development Kit

} Kinetis Design Studio IDE

– No-cost integrated development environment (IDE)

for Kinetis MCUs

– Eclipse and GCC-based IDE for C/C++ editing,

compiling and debugging

} Broad ARM ecosystem support through our

Connect partner program

Proprietary MQX™ RTOS

} Commercial-grade MCU software platform

at no cost with optional add-on software and

support packages

Bootloader

} Common bootloader for all Kinetis MCUs

} In-system flash programming over a serial

connection: erase, program, verify

} ROM-based bootloader with open source

software and host-side programming utilities

Development Hardware

} TWR-KL82Z72M Tower System modular

development platform

– Rapid prototyping and evaluation

– Low cost, interchangeable modules

} FRDM-KL82Z Freedom development platform

– Low cost

– Arduino™ R3 compatible

– mbed-enabled

KINETIS KL8x MCU FAMILY BLOCK DIAGRAM

Proprietary Technology KL81 MCU Only

Timers

System Memories

Communication Interfaces HMI

Clock SCG

Internal and

External

Watchdogs

8-ch DMA

24 I/O Wake-Up Unit

MPU

Phase-Locked

Loop

Frequency-

Locked Loop

Low/High- Frequency

Oscillators

Internal

Reference Clocks

Security

and Integrity

Analog

Core

Debug

Interfaces

Micro Trace

Buffer

Interrupt

Controller

ARM

Cortex

-M0+ Core

Up to 72 MHz

( Up to 96 MHz for high-speed run) with BME

16-bit ADC

1 x ACMP

12-bit DAC

1.2V VREF

LPTPM

Periodic Interrupt

Timers

Low-Power

Timer

Independent

Real-Time Clock

(RTC)

Program Flash

(128 KB)

XIP QuadSPI

SRAM

(96 KB)

ROM (32 KB)

GPIO

FlexI/O

TSI

2 x I

3 x LPUART

2 x SPI

2 x EMVSIM

1 x USB OTG

(LS/FS) + PHY

Cyclic Redundancy

Check (CRC)

True Random

Number Generator

DryIce with

8 Tamper Pins

LTC (AES, 3DES,

SHA256, RSA,ECC)

KINETIS KL8x MCU BLOCK DIAGRAM

Document Number:

KNTSKL8XFS REV 1

www.nxp.com/Kinetis/Lseries

Kinetis, Processor Expert and Tower are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off.

All other product or service names are the property of their respective owners. ARM, Cortex and Keil are registered

trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. mbed is a trademark of ARM Limited

KINETIS KL8x MCUS: ADVANCED SECURITY ARCHITECTURE KEY FEATURES

Features* Benefit Feature Details

KL82

Flash access control (FAC)

configurable memory protection

scheme designed to allow end

users to utilize software libraries

while offering programmable

restrictions to these libraries

Protection of software IP Non-volatile control registers to set access

privileges of on chip flash resources. Supervisor

or execute only access can be set for up to 64

different segments.

Hardware and software

mechanisms for acceleration

of symmetric cryptography

and hashing functions

Reduces CPU loading for cryptographic functions.

Simplifies the implementation of higher level security

functions and network security standards. For firmware

updates, hashing of firmware can be used with

encryption keys to ensure that the firmware is trusted

Hardware implementation of security operations

symmetrical cryptography. Supports DES, 3DES,

AES, SHA-1 and SHA-256 algorithms.

Cryptographic co-processor

for AES, DES and public key

cryptography

Offload CPU and reduced software footprint.

Acceleration for RSA2048, ECDSA and ECDH

reduces the latency for authentication.

KL81

Tamper detect module with

up to 8 tamper pins

Reduce external circuits needed to support

anti-tamper mechanisms

Secure key storage space with asynchronous

erasure when external tamper events occur.

Tamper detection for pin, temperature, voltage

and clock, as well as active tamper.

*Security features within the Kinetis KL8x MCU family are incremental. For a full list of security features offered with Kinetis MCUs, visit: www.nxp.com/Security.

P1-P3

MKL81Z128VMC7

Mfr. #:

Buy MKL81Z128VMC7

Manufacturer:

NXP / Freescale

Description:

ARM Microcontrollers - MCU MKL81Z128VMC7/LFBGA121///TRAY MULTIPLE DP BAKEABLE

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

MKL81Z128VMC7

MKL81Z128VMC7

Products related to this Datasheet