LQM21PZ1R0NGRD

Spec No. JELF243B-9114A-01 P.1/9
MURATA MFG.CO., LTD
Reference
Only
Operating Temperature C)
85 125
0
Rated Current (A)
at 85°C
Rated current
at 125°C
Rated current
CHIP COIL (CHIP INDUCTORS) LQM21PZ□□□□GD
REFERENCE SPECIFICATIONAEC-Q200
1. Scope
This reference specification applies to Chip Coil (Chip Inductors) LQM21PZ_GD series for automotive electronics
based on AEC-Q200 except for Power train and Safety.
2. Part Numbering
(ex) LQ M 21 P Z 1R0 N G C D
Product ID Structure Dimension Applications Category Inductance Tolerance Dimension Other Packaging
(L×W) and (T)
D: Taping
Characteristics
3. Rating
Operating Temperature Range. – 55°C to +125°C
Storage Temperature Range.55°C to
+125°C
Customer
Part Number
MURATA
Part Number
Inductance
DC
Resistance
(Ω)
Self
Resonant
Frequency
(MHz min.)
Rated Current
*1
(A)
ESD
Rank
4<8kV
(μH) Tolerance
85 125
LQM21PZR47MG0D 0.47 M±20%
0.075±25% 100 1.3
*2
0.95
*2
4
LQM21PZR54MG0D 0.54 M±20%
LQM21PZ3R3MG0D
3.3
M±20%
N±30%
0.165±25% 30 0.8
*2
0.55
*2
LQM21PZ3R3NG0D
LQM21PZ1R0NGCD 1.0 N±30% 0.10±25% 50 0.9
*2
0.65
*2
LQM21PZ2R2NGCD 2.2 N±30% 0.23±25% 40 0.8
*2
0.6
*2
LQM21PZ1R0NGRD 1.0 N±30% 0.066±25% 50 1.3
*2
0.95
*2
LQM21PZ3R3MGRD
3.3
M±20%
N±30%
0.15±25% 30 1.0
*2
0.75
*2
LQM21PZ3R3NGRD
LQM21PZ4R7MGRD
4.7
M±20%
N±30%
0.23±25% 30 0.8
*2
0.6
*2
LQM21PZ4R7NGRD
*1 When applied Rated current to the Products, temperature rise caused by self-generated heat shall be limited to
40 max
*2 As for the Rated current marked with
*2
,
Rated Current is derated as right figure
depending on the operating temperature.
Spec No. JELF243B-9114A-01 P.2/9
MURATA MFG.CO., LTD
Reference
Only
4. T
esting Conditions
Unless otherwise specified In case of doubt
Temperature : Ordinary Temperature / 15°C to 35°C Temperature
: 20°C ± 2°C
Humidity : Ordinary Humidity / 25%(RH) to 85%(RH) Humidity : 60%(RH) to 70%(RH)
Atmospheric Pressure : 86kPa to 106kPa
5. Appearance and Dimensions
Unit Mass (Typical value)
0.012g
(in
mm)
6. Electrical Performan
ce
No
.
Item Specification
Test Method
6.1 Inductance Inductance shall mee
t
item 3.
Measuring Equipment:
Agilent 4294A or equivalent (1mA)
Measuring Frequency: 1MHz
6.2 DC
Resistance
DC Resistance shall
meet item 3.
Measuring Equipment: Digital multi meter
DC resistance shall be measured after
putting chip coil between the terminal 2
under the condition of opening between
a and b.
Every measurement the terminal 1 shall
be shorted between a and b when
changing chip coil.
6.3 Self
Resonant
Frequency
(S.R.F)
S.R.F shall meet item 3. Measuring Equipment:
Agilent 4294A or equivalent
Digital multi meter
(TR6846 or equivalent)
terminal2terminal1
SW
a
b
0.5±0.2
2.0±0.1
5
1.25±0.15
0.9±0.1
Spec No. JELF243B-9114A-01 P.3/9
MURATA MFG.CO., LTD
Reference
Only
7. AEC-Q200 Requirement
7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200 Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature
Cycling
1000cycles
-55 deg C to + 125deg C
Set for 24hours at room
temperature,then
measured.
Meet Table A after testing.
7 Biased
Humidity
1000hours at 85 deg C,
85%RH
Meet Table B after testing.
Table B
8 Operational
Life
A
pply 125 deg C 1000 hours
Set for 24hours at room
temperature, then measured
Meet Table B after testing.
9 External
Visual
V
isual inspection No abnormalities
10 Physical
Dimension
Meet ITEM 5
Style and Dimensions
No defects
12 Resistance
t
o Solvents
Per
MIL-STD-202
Method 215
Not Applicable
13 Mechanical
Shock
Per MIL-STD-202
Method 213
Condition C:
100g’s/6ms/Half sine
Meet Table A after testing.
14
ibration 5g's for 20 minutes,
12cycles each of 3
orientations
T
est from 10-2000Hz.
Meet Table A after testing.
15 Resistance
To Soldering
Heat
No-heating
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating150 to 180C / 90±30s
Meet Table A after testing.
Appearance No damage
Inductance
(at 1MHz)
Within ±20%
Appearance No damage
Inductance
(at 1MHz)
Within ±50%

LQM21PZ1R0NGRD

Mfr. #:
Manufacturer:
Murata Electronics
Description:
Fixed Inductors
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet