B32355C4155J019

Film Capacitors – AC Capacitors B32355C
Motor run capacitors
B32355C – M
otorCap™ S3 Compact, 100 °C
CAP RD FILM PD AC July 2017
Please read Cautions and warnings and Page 4 of 6
Important notes at the end of this document.
Dimensional drawing:
Film Capacitors – AC Capacitors B32355C
Motor run capacitors
B32355C – M
otorCap™ S3 Compact, 100 °C
CAP RD FILM PD AC July 2017
Please read Cautions and warnings and Page 5 of 6
Important notes at the end of this document.
Ordering codes & Packaging units
V
R
V AC
C
R
µF
Dimensions
D × L
mm
Ordering code Packing units
pcs
400
1.5 25 × 51 B32355C4155J019 231
2.0 25 × 51
B32355C4205J019
231
2.5 25 × 51
B32355C4255J019
231
3 25 × 60.5
B32355C4305J015
198
4 25 × 75
B32355C4405J015
To be defined
5 25 × 75
B32355C4505J015
To be defined
Displa
y of ordering codes for EPCOS products
The ordering code for one and the same EPCOS product can be represented differently in data
sheets, data books, other publications, on the EPCOS website, or in order-related documents such as
shipping notes, order confirmations and product labels. The varying representations of the
ordering codes are due to different processes employed and do not affect the specifications of
the respective products. Detailed information can be found on the Internet under
www.epcos.com/orderingcodes
Cautions and warnings
U Please read “Applications warning, installation and maintenance instructions” and the “General
Safety Data Sheet for Power Capacitors” issued by ZVEI, which are available on the internet at
www.epcos.com/ac_capacitors, to ensure optimum performance and to prevent products from
failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical
specifications. You are kindly requested to approve our product specifications or request our approval
for your specification before ordering.
Important notes
Page 6 of 6
The following applies to all products named in this publication:
1.
Some parts of this publication contain statements about the suitability of our pr
oducts for
certain areas of appl
ication. These statements are based on our knowled
ge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a
rule, EPCOS is either
unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular custom
er application.
2.
We also point out that in individual cases, a malfunction of electronic components or fail
ure
before the end of their usual servi
ce life cannot be completely ruled out in the
current state
of the art, even if the
y are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitr
y
or redundancy) that no injury or damage is su
stained by third parties in the event of malfunction or
failure of an electronic
component.
3.
The warnings, cautions and product-specific notes must be observed.
4.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication ma
y change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when
you place an order.
We also
reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Produ
cts and Services in the Electrical Industry
published b
y the German Electrical and Electronics Industry Association (ZVEI)
.
7.
The trade names EPCOS, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS,
DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD,
MKK,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar,
SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/t
rademarks.

B32355C4155J019

Mfr. #:
Manufacturer:
EPCOS / TDK
Description:
Motor Start Capacitors & Motor Run Capacitors 1.5uF 5% 400Vac 25x51 wire S3
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union