Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
Low impedance, 105℃
KYBSeries
・
Low impedance, high ripple and long life from KYA series
・
Newly innovative electrolyte is employed to minimize impedance
・
Endurance with ripple current : 4,000 to 10,000 hours at 105
℃
・
Non solvent resistant type
・
RoHS2 Compliant
◆
SPECIFICATIONS
Items Characteristics
Category
Temperature Range
-40 to +105
℃
Rated Voltage Range
6.3 to 100V
dc
Capacitance Tolerance
±
20% (M) (at 20
℃
, 120Hz)
Leakage Current
I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20
℃
after 2 minutes)
Dissipation Factor
(tan
δ
)
Rated voltage (V
dc
) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V
tan
δ
(Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20
℃
, 120Hz)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Rated voltage (V
dc
) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V
Z(-25
℃
)/Z(+20
℃
) 4 3 2 2 2 2 2 2 2
Z(-40
℃
)/Z(+20
℃
) 8 6 4 3 3 3 3 3 3 (at 120Hz)
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20
℃
after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105
℃
.
Rated Voltage(V
dc
) 6.3 to 10V
dc
16 to 100V
dc
Time
φ
5: 4,000hours
φ
6.3 & 8: 6,000hours
φ
10 to 18: 8,000hours
φ
5: 5,000hours
φ
6.3 & 8: 7,000hours
φ
10 to 18: 10,000hours
Capacitance change
≦±
30% of the initial value
≦±
25% of the initial value
D.F. (tan
δ
)
≦
200% of the initial specified value
≦
200% of the initial specified value
Leakage current
≦
The initial specified value
≦
The initial specified value
Shelf Life
The following specifications shall be satisfied when the capacitors are restored to 20
℃
after exposing them for 500 hours at 105
℃
without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±
25% of the initial value
D.F. (tan
δ
)
≦
200% of the initial specified value
Leakage current
≦
The initial specified value
◆
DIMENSIONS [mm]
L' 15min. 4min.
φD'
φd
F±0.5
Vent
φ5 &φ6.3)
F±0.5
Sleeve (PET : Brown)
5
0.5
2.0
φD
φd
F
φD'
L'
6.3
0.5
2.5
8
0.6
3.5
12.5
0.6
5.0
16
0.8
7.5
18
0.8
7.5
10
0.6
5.0
φD+0.5max.
L+1.5max.
(φ5 to φ10)
●
(φ12.5 to φ18)
◆
PART NUMBERING SYSTEM
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6.8µF:6R8, 39µF:390, 470µ
Lead forming·taping code
Terminal code
Voltage code (ex. 6.3V:6R3, 50V:500)
Series code
Category
E K Y B E M
1 3 42 6 7 8 9 10 13125 18171611 1514
Please refer to "Product code guide (radial lead type)"
KYB
Lower Z
KYA P5-35
5-32
CAT. No. E1001R
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
