MK1575-01
CLOCK RECOVERY PLL CLOCK SYNTHESIZER
IDT™
CLOCK RECOVERY PLL 10
MK1575-01 REV P 051310
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the MK1575-01. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
Recommended Operation Conditions
DC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V ±5%, Ambient Temperature -40 to +85° C
Item Rating
Supply Voltage, VDD 7 V
All Inputs and Outputs -0.5 V to VDD+0.5 V
Ambient Operating Temperature (industrial version) -40 to +85° C
Ambient Operating Temperature (commercial version) 0 to +70° C
Storage Temperature -65 to +150° C
Junction Temperature 125° C
Soldering Temperature 260° C
Parameter Min. Typ. Max. Units
Ambient Operating Temperature (industrial version) -40 +85 ° C
Ambient Operating Temperature (commercial version) 0 +70 ° C
Power Supply Voltage (measured in respect to GND) +3.15 +3.3 +3.45 V
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 3.15 3.3 3.45 V
Supply Current IDD Clock outputs
unloaded, VDD = 3.3
V
10 mA
Supply Current in Power Down I
DD
OE = VDD 100 μA
Charge Pump Current I
CP
12.5 μA
Input High Voltage V
IH
2V
Input Low Voltage V
IL
0.8 V
Input High Current I
IH
V
IH
= VDD -10 +10 μA
Input Low Current I
IL
V
IL
= 0 -10 +10 μA
Input Capacitance, except X1 C
IN
7pF
Output High Voltage (CMOS
Level)
V
OH
I
OH
= -4 mA VDD-0.4 V
