E2010

Corporate
12220 World Trade Drive
San Diego, CA 92128
Tel: 619 674 8100
FAX:619 674 8262
http://www.pulseeng.com
Quick-Facts 619 674 9672
Europe
Millpool house
Mill Lane, Godalming
Surrey GU7 1EY
U.K.
Tel: 441 483 428 877
FAX:441 483 416 011
Asia
P.O. Box 26-11, KEPZ
6 Central Sixth Road
KEPZ, Kaohsiung
Taiwan, R.O.C.
Tel: 886 7 821 3141
FAX:886 7 841 9707
Distributor
For More Information :
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
Printed on recycled paper. ©1998, Pulse Engineering, Inc.
Application Notes
Pulse’s interface modules provide the complete analog solution for
10Base-T multiport applications in various packages. Each module
includes low pass filters, isolation transformers, and may contain
common mode chokes. The E2010 contains data and pre-equalization
resistors on the transmit channel; and the receive channel is
terminated with impedance matching resistors.
Electrical Functions Include:
1. Impedance Matching-The low pass filters, in
conjunction with selected resistor values, effectively match
the impedance characteristics of the IC to those of the
transmission line. Precision wound inductors help control
passband impedances and lower return loss parameters. The
proper cut-off frequency minimizes insertion loss and delay
distortion while maximizing attenuation in the stopband.
2. EMI Suppression-The filter module is designed to control
signal harmonics and jitter, reflections, crosstalk interferences,
and common mode noise, which may contribute to radiated
and conducted emissions. High impedance common mode
chokes significantly minimize their effects.
3. Equipment Isolation- The transformer is designed to
withstand 2000 Vrms, ensuring protection from static charge
on the twisted pair line. Each module is fully tested to ensure
compliance with IEEE 802.3 1993 standards.
In some applications, such as multiport repeaters, many channels are
in close proximity. User compliance with FCC/CISPR22 Class B
requirements can be achieved by applying rigorous design guidelines
to suppress noise mechanisms. Attention to high frequency signal
paths, good PCB grounding techniques, and component placements
are critical.
A typical Network Interface Card Application is featured below.
UTP
DB-15
Vcc
23Z90SM
AUI
XFMR
AUI
Port
10 Base-T
Transceiver
1.2 K
61.9
422
61.9
Receive
Filter
MDI
Port
RJ-45
TXD+
CD
XMT
XMT
XMT
RCV
RCV
Transmit
Filter
E2010
422
TD+
TD-
RD+
RD-
XMT
XMT
XMT
CD
RCV
RCV
49.9
49.9
TXP+
TXD-
TXP-
RXI+
RXI-
Vcc
Typical Application Circuit
E104.% (/)
10BASE-T THROUGH HOLE
INTERFACE MODULES
For 802.3 10Base-T LAN Applications
Note: Modules are packaged in tubes.

E2010

Mfr. #:
Manufacturer:
Pulse Electronics
Description:
Audio Transformers / Signal Transformers MOD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet