Data brief
For further information contact your local STMicroelectronics sales office.
September 2010 Doc ID 17907 Rev 1 1/6
6
STEVAL-MKI094V1
MEMS demonstration board based on the LYPR540AH
(three-axis analog output gyroscope)
Features
■ Two different working modes:
– analog (AWM)
– digital (DWM)
■ RoHS compliant
Description
The STEVAL-MKI094V1 is a demonstration kit
designed to provide the user with a complete,
ready-to-use platform for demonstration of the
LYPR540AH product family.
The kit includes a sensing element and an IC
interface capable of translating information from
the sensing element into a measured signal that
can be used for external applications.
In addition to the MEMS sensor, the
demonstration board uses an ST7 microcontroller
which functions as a bridge between the sensor
and the PC. This makes it possible to download
the graphical user interface (GUI) from the
website or to use dedicated software routines for
customized applications.
The STEVAL-MKI094V1 demonstration board has
been designed for use in two different working
modes: analog and digital
In analog mode (AWM) the microcontroller on the
board is disabled and the analog outputs of the
device are available to the user on a dedicated
connector. This is the default working mode when
the power supply is applied either through the
USB connector or through the supply connector.
In digital mode (DWM) the microcontroller on the
board is enabled and it allows the user to digitally
acquire the output signals of the device, to see
them on the PC through the dedicated GUI, and
to control the control pins of the device.
STEVAL-MKI094V1
www.st.com
Obsolete Product(s) - Obsolete Product(s)
