OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SA15CA/54

P1-P3P4-P6
SA5.0 THRU SA170CA
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Stand-off Voltage - 5.0 to 170 Volts Peak Pulse Power - 500 Watts
FEATURES
♦ Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
♦ Glass passivated junction
♦ 500W peak pulse power surge capability with a
10/1000µs waveform, repetition rate (duty cycle): 0.01%
♦ Excellent clamping capability
♦ Low incremental surge resistance
♦ Fast response time: typically less
than 1.0ps from 0 Volts to V
(BR)
for uni-directional and
5.0ns for bi-directional types
♦ For devices with V
(BR)
≥10V, I
D
are typically less than
1.0µA
♦ High temperature soldering guaranteed:
265°C/10 seconds 0.375” (9.5mm) lead length,
5lbs (2.3 kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AC molded plastic body over
passivated junction
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: For uni-directional types the color band denotes
the cathode, which is positive with respect to the anode
under normal TVS operation
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional use C or CA Suffix. (e.g. SA5.0C, SA170CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified
SYMBOL VALUE UNITS
Peak pulse power dissipation with a 10/1000µs waveform
(NOTE 1, FIG. 1)
P
PPM
Minimum 500 Watts
Peak pulse current with a 10/1000µs waveform
(NOTE 1)
I
PPM SEE TABLE 1
Amps
Steady state power dissipation at T
L
=75°C
lead lengths 0.375" (9.5mm)
(NOTE 2)
P
M(AV)
3.0 Watts
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load, unidirectional only
(JEDEC Method)
(NOTE 3)
I
FSM
70 Amps
Maximum instantaneous forward voltage at 35A for
unidirectional only
V
F
3.5 Volts
Operating junction and storage temperature range T
J
, T
STG
-55 to +175 °C
NOTES
(1) Non-repetitive current pulse, per Fig. 3 and derated above T
A
=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
1/25/99
0.034 (0.86)
0.028 (0.71)
0.140 (3.6)
0.104 (2.6)
DIA.
DIA.
1.0
MIN.
(25.4)
0.230 (5.8)
0.300 (7.6)
1.0
MIN.
(25.4)
DO-204AC
Dimensions in inches and (millimeters)
ELECTRICAL CHARACTERISTICS at (T
A
=25°C unless otherwise noted) TABLE 1
Maximum
Breakdown Voltage Maximum Peak Pulse Maximum Maximum
V
(BR)
Stand-off Reverse Current Clamping Temperature
(Volts)
(NOTE 1)
Test Voltage Leakage I
PPM
Voltage at Coefficient
Current V
WM
at V
WM (NOTE 2)
I
PPM
of V
(BR)
Device Type MIN MAX
at I
T
(Volts) I
D (NOTE3)
(µA) (Amps) V
C
(Volts) (mV / °C)
(mA)
SA5.0 6.40 7.30 10 5.0 600 52.1 9.6 5.0
SA5.0A 6.40 7.00 10 5.0 600 54.3 9.2 5.0
SA6.0 6.67 8.15 10 6.0 600 43.9 11.4 5.0
SA6.0A 6.67 7.37 10 6.0 600 48.5 10.3 5.0
SA6.5 7.22 8.82 10 6.5 400 40.7 12.3 5.0
SA6.5A 7.22 7.98 10 6.5 400 44.7 11.2 5.0
SA7.0 7.78 9.51 10 7.0 150 37.6 13.3 6.0
SA7.0A 7.78 8.60 10 7.0 150 41.7 12.0 6.0
SA7.5 8.33 10.2 1.0 7.5 50 35.0 14.3 7.0
SA7.5A 8.33 9.21 1.0 7.5 50 38.8 12.9 7.0
SA8.0 8.89 10.9 1.0 8.0 25 33.3 15.0 7.0
SA8.0A 8.89 9.83 1.0 8.0 25 36.8 13.6 7.0
SA8.5 9.44 11.5 1.0 8.5 10 31.4 15.9 8.0
SA8.5A 9.44 10.4 1.0 8.5 10 34.7 14.4 8.0
SA9.0 10.0 12.2 1.0 9.0 5.0 29.6 16.9 9.0
SA9.0A 10.0 11.1 1.0 9.0 5.0 32.5 15.4 9.0
SA10 11.1 13.6 1.0 10.0 1.0 26.6 18.8 10.0
SA10A 11.1 12.3 1.0 10.0 1.0 29.4 17.0 10.0
SA11 12.2 14.9 1.0 11.0 1.0 24.9 20.1 11.0
SA11A 12.2 13.5 1.0 11.0 1.0 27.5 18.2 11.0
SA12 13.3 16.3 1.0 12.0 1.0 22.7 22.0 12.0
SA12A 13.3 14.7 1.0 12.0 1.0 25.1 19.9 12.0
SA13 14.4 17.6 1.0 13.0 1.0 21.0 23.8 13.0
SA13A 14.4 15.9 1.0 13.0 1.0 23.3 21.5 13.0
SA14 15.6 19.1 1.0 14.0 1.0 19.4 25.8 14.0
SA14A 15.6 17.2 1.0 14.0 1.0 21.6 23.2 14.0
SA15 16.7 20.4 1.0 15.0 1.0 18.6 26.9 16.0
SA15A 16.7 18.5 1.0 15.0 1.0 20.5 24.4 16.0
SA16 17.8 21.8 1.0 16.0 1.0 17.4 28.8 19.0
SA16A 17.8 19.7 1.0 16.0 1.0 19.2 26.0 17.0
SA17 18.9 23.1 1.0 17.0 1.0 16.4 30.5 20.0
SA17A 18.9 20.9 1.0 17.0 1.0 18.1 27.6 19.0
SA18 20.0 24.4 1.0 18.0 1.0 15.5 32.2 21.0
SA18A 20.0 22.1 1.0 18.0 1.0 17.1 29.2 20.0
SA20 22.2 27.1 1.0 20.0 1.0 14.0 35.8 25.0
SA20A 22.2 24.5 1.0 20.0 1.0 15.4 32.4 23.0
SA22 24.4 29.8 1.0 22.0 1.0 22.7 39.4 28.0
SA22A 24.4 26.9 1.0 22.0 1.0 14.1 35.5 25.0
SA24 26.7 32.6 1.0 24.0 1.0 11.6 43.0 31.0
SA24A 26.7 29.5 1.0 24.0 1.0 12.9 38.9 28.0
SA26 28.9 35.3 1.0 26.0 1.0 10.7 46.6 31.0
SA26A 28.9 31.9 1.0 26.0 1.0 11.9 42.1 30.0
SA28 31.1 38.0 1.0 28.0 1.0 10.0 50.1 35.0
SA28A 31.1 34.4 1.0 28.0 1.0 11.0 45.4 31.0
SA30 33.3 40.7 1.0 30.0 1.0 9.3 53.5 39.0
SA30A 33.3 36.8 1.0 30.0 1.0 10 48.4 36.0
SA33 36.7 44.9 1.0 33.0 1.0 8.5 59.0 42.0
SA33A 36.7 40.6 1.0 33.0 1.0 9.4 53.3 39.0
SA36 40.0 48.9 1.0 36.0 1.0 7.8 64.3 46.0
SA36A 40.0 44.2 1.0 36.0 1.0 8.6 58.1 41.0
SA40 44.4 54.3 1.0 40.0 1.0 7.0 71.4 51.0
SA40A 44.4 49.1 1.0 40.0 1.0 7.8 64.5 46.0
ELECTRICAL CHARACTERISTICS at (T
A
=25°C unless otherwise noted) TABLE 1 (Cont’d)
Maximum
Breakdown Voltage Maximum Peak Pulse Maximum Maximum
V
(BR)
Stand-off Reverse Current Clamping Temperature
Volts
(NOTE 1)
Test Voltage Leakage I
PPM
Voltage at Coefficient
Current V
WM
at V
WM (NOTE 2)
I
PPM
of V
(BR)
Device Type MIN MAX
at I
T
(Volts) I
D (NOTE3)
(µA) (Amps) V
C
(Volts) (mV / °C)
(mA)
SA43 47.8 58.4 1.0 43.0 1.0 6.5 76.7 55.0
SA43A 47.8 52.8 1.0 43.0 1.0 7.2 69.4 50.0
SA45 50.0 61.1 1.0 45.0 1.0 6.2 80.3 58.0
SA45A 50.0 55.3 1.0 45.0 1.0 6.9 72.7 52.0
SA48 53.3 65.2 1.0 48.0 1.0 5.8 85.5 63.0
SA48A 53.3 58.9 1.0 48.0 1.0 6.5 77.4 56.0
SA51 56.7 69.3 1.0 51.0 1.0 5.5 91.1 66.0
SA51A 56.7 62.7 1.0 51.0 1.0 6.1 82.4 61.0
SA54 60.0 73.3 1.0 54.0 1.0 5.2 96.3 71.0
SA54A 60.0 66.3 1.0 54.0 1.0 5.7 87.1 65.0
SA58 64.4 78.7 1.0 58.0 1.0 4.9 103 78.0
SA58A 64.4 71.2 1.0 58.0 1.0 5.3 93.6 70.0
SA60 66.7 81.5 1.0 60.0 1.0 4.7 107 80.0
SA60A 66.7 73.7 1.0 60.0 1.0 5.2 96.8 71.0
SA64 71.1 86.9 1.0 64.0 1.0 4.4 114 86.0
SA64A 71.1 78.6 1.0 64.0 1.0 4.9 103 76.0
SA70 77.8 95.1 1.0 70.0 1.0 4.0 125 94.0
SA70A 77.8 86.0 1.0 70.0 1.0 4.4 113 85.0
SA75 83.3 102 1.0 75.0 1.0 3.7 134 101
SA75A 83.3 92.1 1.0 75.0 1.0 4.1 121 91.0
SA78 86.7 106 1.0 78.0 1.0 3.6 139 105
SA78A 86.7 95.8 1.0 78.0 1.0 4.0 126 95.0
SA85 94.4 115 1.0 85.0 1.0 3.3 151 114
SA85A 94.4 104 1.0 85.0 1.0 3.6 137 103
SA90 100 122 1.0 90.0 1.0 3.1 160 121
SA90A 100 111 1.0 90.0 1.0 3.4 146 110
SA100 111 136 1.0 100 1.0 2.8 179 135
SA100A 111 123 1.0 100 1.0 3.1 162 123
SA110 122 149 1.0 110 1.0 2.6 196 148
SA110A 122 135 1.0 110 1.0 2.8 177 133
SA120 133 163 1.0 120 1.0 2.3 214 162
SA120A 133 147 1.0 120 1.0 2.6 193 146
SA130 144 176 1.0 130 1.0 2.2 230 175
SA130A 144 159 1.0 130 1.0 2.4 209 158
SA150 167 204 1.0 150 1.0 1.9 268 203
SA150A 167 185 1.0 150 1.0 2.1 243 184
SA160 178 218 1.0 160 1.0 1.7 257 217
SA160A 178 197 1.0 160 1.0 1.9 259 196
SA170 189 231 1.0 170 1.0 1.6 304 230
SA170A 189 209 1.0 170 1.0 1.8 275 208
NOTES
(1) V
(BR)
measured after I
T
applied for 300µs. I
T
=square wave pulse or equivalent
(2) Surge current waveform per Fig. 3 and derate per Fig. 2
(3) For bidirectional types with V
WM
of 10 Volts and less, the I
D
limit is doubled.
(4) All terms and symbols are consistent with ANSI/IEEE C62.35
P1-P3P4-P6

SA15CA/54

Mfr. #:
Buy SA15CA/54
Manufacturer:
Vishay Semiconductors
Description:
ESD Suppressors / TVS Diodes RECOMMENDED ALT 625-SA15CA-E3/54
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet