MSC0886.PDF ISO 9001 CERTIFIED REV J 7/06/2000
8700 E. Thomas Road
Scottsdale, AZ 85251
Tel: (480) 941-6300
Fax: (480) 947-1503
DESCRIPTION (300 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in
an SO-8 configuration giving protection to 4 Bidirectional data or
interface lines. It is designed for use in applications where protection is
required at the board level from voltage transients caused by
electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical
fast transients (EFT) per IEC 1000-4-4 and effects of secondary
lighting.
These TVS arrays have a peak power rating of 300 watts for an 8/20 µsec pulse. This array is suitable for
protection of sensitive circuitry consisting of TTL, CMOS DRAM’s, SRAM’s, HCMOS, HSIC
microprocessors, and I/O transceivers. The SMDAXXC-4 product provides board level protection from
static electricity and other induced voltage surges that can damage sensitive circuitry.
FEATURES MECHANICAL
• Protects up to 4 Bidirectional lines • Molded SO-8 Surface Mount
• Surge protection Per IEC 1000-4-2, 1000-4-4 • Weight: 0.066 grams (approximate)
• SO-8 Packaging • Marking: Logo, device number, date code
• Pin #1 defined by DOT on top of package
MAXIMUM RATINGS PACKAGING
• Operating Temperatures: -55
0
C to +150
0
C • Tape & Reel EIA Standard 481-1-A
• Storage Temperature: -55
0
C to +150
0
C • 13 inch reel 2,500 (OPTIONAL)
• Peak Pulse Power: 300 Watts (8/20 µsec, Figure 1) • Carrier tubes 95 pcs per (STANDARD)
• Pulse Repetition Rate: <.01%
ELECTRICAL CHARACTERISTICS PER LINE @ 25
0
C Unless otherwise specified
STAND
OFF
VOLTAG
E
V
WM
VOLTS
BREAKDOWN
VOLTAGE
V
BR
@1 mA
VOLTS
CLAMPING
VOLTAGE
V
C
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
V
C
@ 5 Amp
(FIGURE 2)
VOLTS
LEAKAGE
CURRENT
I
D
@ V
WM
µA
CAPACITANCE
(f=1 MHz)
@0V
C
pF
TEMPERATURE
COEFFICIENT
OF V
BR
á
VBR
mV/°C
PART
NUMBER
DEVICE
MARKING
MAX MIN MAX MAX MAX TYP MAX
SMDA03C-4 REA 3.3 4 7.0 9.0 200 300 -5
SMDA05C-4 REB 5.0 6.0 9.8 11 400 200 3
SMDA12C-4 REC 12.0 13.3 19.0 24 1 185 10
SMDA15C-4 RED 15.0 16.7 24.0 30 1 140 13
SMDA24C-4 REE 24.0 26.7 43.0 55 1 90 30
NOTE: TVS product is normally selected based on its stand off Voltage V
WM
. Product selected voltage should be
equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The SMDAXXC-4 product is designed for transient voltage suppression protection of ESD sensitive
components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
SMDA03C-4
thru
SMDA24C-4
TVSarray Series
