STAKING TOOL KITS
Tel (718) 956-8900
•
Fax (718) 956-9040
(800) 221-5510
•
kec@keyelco.com
www.key elco.com
31-07 20th Road – Astoria, NY 11105-2017
RoHS COMPLIANT
~
ISO 9001 CERTIFIED
INDIVIDUAL TOOLS“BASIC” STAKING KIT
“MASTER” STAKING KIT
“IMPACT” STAKING KIT
This kit provides all of the components needed to stake most terminals, standoffs, eyelets or rivets.
This kit also includes sprung receding pins so that eyelets can be prealigned for easy assembly of
componets. Kit supplied in convenient plastic case for ease of use.
All that is required to stake almost all swage components. Just press down and it stakes. Tools pro-
vided allow bench top staking with out setting up arbor or drill press. Staking tool can be adjusted
This kit provides the basic components needed to stake a majority of our most popular sizes of
eyelets, rivets and terminals. The unskilled operator can produce profesional looking assemblies
quickly and with minimal training.
TOP SETTING TOOLS (Swager)
For Single End Terminals, Eyelets or Rivets
For Doube End (Feed-Thru)
Hole in tool fits over Pin head and
securely stakes the rivet part of terminal.
BOTTOM ANVILS
For Single End Terminals or Double End Terminals
Anvils have different size holes in each end therefore
will accept 2 sizes of Pins of either Single or Double
end Turret type Terminals.
ANVILS FOR FORK TERMINALS
Accepts Diameter of 3/32 to 5/32 at one end
and diamter of 3/16 other end .040 (1.0) slot
one end and .060 (1.52) slot at other end.
CAT. NO. 1726
ANVILS FOR SWAGE SPACERS
TOOL HOLDERS
Tool holders will hold all .250 (6.4) diameter anvils.
May be used with receding pin and return spring to
hold eyelets in place during the staking process.
CAT. NO. 1719
AB
CAT. NO. DIA. DIA.
1722 .053 (1.35) .065 (1.65)
1716 .070 (1.78) .100 (2.54)
1717 .128 (3.25) .152 (3.86)
CAT. NO. FOR SHANK DIA.
1714 .062 (1.57) to .098 (2.49)
1715 .110 (2.8) to .125 (3.2)
1328 .130 (3.3) to .140 (3.6)
1324 .180 (4.5) to .190 (4.8)
CAT. NO. FOR PIN ON RIVET END
1304 .051 (1.30) Hole Dia.
1305 .063 (1.60) Hole Dia.
1306 .073 (1.85) Hole Dia.
1307 .086 (1.49) Hole Dia.
1324 .098 (2.49) Hole Dia.
CAT. NO. CONSISTS OF ONE EACH:
1714
Top Setting Tool
1715
1719
Anvil Holder
1716
Bottom Anvil
1717
CAT. NO. CONSISTS OF ONE EACH:
1714
1715
1304
1305 Top Swaging Tool
1306
1307
1324
1719 Anvil Holder
1325 Anvil for 6-32 Standoffs
1326
1716
Anvil for Turret Terminals
1717
1722
1726 Anvil for Fork Turret Terminals
1315 Receding Pin - .045 (1.15) Dia.
1316 Receding Pin - .069 (1.75) Dia.
1321 Return Spring for Receding Pins
CAT. NO. CONSISTS OF ONE EACH:
TOOLS
1302 Impact Handle
1300 Anvil Tool Holder Base
SWAGING TOOLS
1312 .040 (1.02) to .072 (1.83)
1313 .078 (1.98) to .093 (2.36)
SWAGING TOOLS FOR DOUBLE ENDED TURRET
1310
.053 (1.35) Diameter Hole
1311
.062 (1.57) Diameter Hole
ANVIL COMPENTS
1716
1717 Anvil for Turret Terminals
1722
1726 Anvil for Fork Turret Terminals
1315 Receding Pin - .045 (1.15) Dia.
1316 Receding Pin - .069 (1.75) Dia.
1321 Return Spring for Receding Pins
1/4” Diameter Tools
B DIA.
A DIA.
.750
[19.0]
.250 [6.4]
to provide heavy to light blows. Receding sprung pins can be assembled into anvil to locate
eyelets for easy assembly of components. Kit supplied in convenient plastic case for ease of use.
CAT. NO. BUSHING SIZE
1326
Holds Bushing with 5/32” O.D.
1325
For Bushing with 6-32” Thread
1309
For Bushing with 4-40 Thread
.250 [6.4]
DIA.
.750
[19.0]
.065 [1.7] SLOT
.042 [1.1] SLOT
139
CAT. NO. 1721 COMPLETE KIT
CAT. NO. 1713 COMPLETE KIT
CAT. NO. 1707 COMPLETE KIT
EYELET
DIA.
RIVET
DIA.
SHANK
DIA.
EYELET
DIA.
RIVET
DIA.
EYELET
DIA.
RIVET
DIA.
SHANK
DIA.
SHANK
DIA.
