HMC189AMS8ETR

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQ. MULTIPLIERS - PASSIVE - SMT
3
HMC189AMS8 / 189AMS8E
v03.0714
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 2 - 4 GHz INPUT
Outline Drawing
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[3]
HMC189AMS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1
[1]
189A
XXXX
HMC189AMS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1
[2]
189A
XXXX
[1] Max peak reow temperature of 235 °C
[2] Max peak reow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Absolute Maximum Ratings
Input Drive +27 dBm
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1B
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
FREQ. MULTIPLIERS - PASSIVE - SMT
4
HMC189AMS8 / 189AMS8E
v03.0714
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 2 - 4 GHz INPUT
The circuit board used in the application should be
generated with proper RF circuit design techniques.
Signal lines at the RF port should have 50 ohm
impedance and the package ground leads should
be connected directly to the ground plane similar
to that shown above. The evaluation circuit board
shown above is available from Hittite Microwave
Corporation upon request.
Evaluation PCB
List of Materials for Evaluation PCB 103313
[1]
Item Description
J1, J2 PCB Mount SMA Connector
U1 HMC189AMS8(E) Doubler
PCB
[2]
103311 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Pin Description
Pin Number Function Description Interface Schematic
1, 4, 5, 8 N/C
These pins are not connected internally; however, all data shown herein
was measured with these pins connected to RF/DC ground externally.
2 RFIN Pin is DC coupled and matched to 50 Ohms from 2.0 to 4.0 GHz
3, 6 GND All ground leads must be soldered to PCB RF/DC ground.
7 RFOUT Pin is DC coupled and matched to 50 Ohms from 4.0 to 8.0 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D

HMC189AMS8ETR

Mfr. #:
Manufacturer:
Analog Devices Inc.
Description:
Signal Conditioning Passive SMT Freq. Doubler 2 - 4 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union