This is information on a product in full production.
September 2013 DocID1509 Rev 5 1/13
TDA7391
35 W bridge car radio amplifier
Datasheet - production data
Features
High power capability:
– 40 W/4 max
– 35 W/4 EIAJ
– 45 W/3.2 max
– 40 W/3.2 EIAJ
– 32 W/3.2 @ V
S
= 14.4 V, f = 1 kHz,
d=10 %
– 26 W/4 @ V
S
= 14.4 V, f = 1 kHz,
d=10%
DIfferential inputs (either single ended or
differential input signal are accepted)
Minimum external component count:
– No bootstrap capacitors
– No Boucherot cells
– Internally fixed gain (30 dB)
– No SVR Capacitor
Standby function (CMOS compatible)
Programmable turn-on/off delay
No audible pop during mute and standby
operations
Protections:
– Short circuit (to GND, to V
S
, across the
load)
– Very inductive loads
– Chip over temperature
– Load dump
– Open GND
– ESD
Description
The TDA7391 is a bridge class AB audio power
amplifier specially intended for car radio high
power applications.
The high power capability together with the
possibility to operate either in differential input
mode or single ended input mode makes it
suitable for boosters and high end car radio
equipments. The exclusive fully complementary
output stage and the internal fixed gain
configuration drop the external component count.
The on board clipping detector allows easy
implementation of gain compression systems.
Table 1. Device summary
Order code Package Packing
TDA7391 Multiwatt11 (vertical) Tube
www.st.com