28 Part Family
5X5mm 5X5mm3X3mm
1:2 Fanout
1:4 Fanout
1:6 Fanout
1:8 Fanout
2:6 Fanout
2:8 Fanout
Clock Distribution Fanout Buffers
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume
any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and
should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete
all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by
Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where
is” and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other
IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to
make any changes to the information in this document or to any products and services at any time without notice.
A family of 28 buffers offers six fanout combinations, supports
clock rates up to 750 MHz, and a wide range of input and
output clock signals making it ideal to use across multiple
applications with minimal design efforts.
Internal input termination eliminates the need for external
termination and biasing components. In addition, the ultra low-
additive jitter and highly effective power supply noise filtering
leaves the majority of the jitter budget to the clock source.
The clock buffers devices are synergistic with Microsemi
®
industry-leading timing portfolio and, when used together,
these devices provide customer improved board performance
and complete timing solutions.
Available and Support
Clock Distribution Clock Buffers are in volume production.
To learn more about Microsemi new clock buffers visit
www.microsemi.com/timing-and-synchronization/clock-fan-
out-buffers. Full information, including complete data sheets
and design manuals, is available to registered Microsemi
customers. To register for a Microsemi account, visit
www.microsemi.com/create-an-account.
Key Features
Clock Rates up to 750 MHz
Inputs
• LVPECL, LVDS, CML, HCSL or LVCMOS
• Devices with internal or external input termination available
Outputs
• LVPECL or LVDS
Ultra-Low Additive Jitter
• As low as 39 fs RMS
Power Supply Noise
• As low as 48 fs RMS
Key Benefits
Preserve Signal Integrity
• Offer industry leading additive jitter and best power supply
noise rejection (PSNR) performance
Ease Board Design
• Provide a flexible I/O structure; accept different types of input
signals and produce different types of output signals
• Eliminate the need for external circuitry at the inputs with on-
chip internal input terminations
Building Block of a Complete Timing Solution
• Clock buffers are highly synergistic with Microsemi industry-
leading timing portfolio and offer tested interoperability and
optimized performance