APEM www.apem.com
MT series
Sealed selector switches
Disncve features-Specificaons
Environmentally sealed selector switch (IP68)
Mulple funcons available
Various contact materials that allow usage from dry circuit
applicaons up to 4A
ELECTRICAL AND GENERAL SPECIFICATIONS
• Max. current/voltage rang with resisve load
- Silver contacts (A):4A 30VDC
- Gold plated silver contacts (AD):4A 30VDC (gold plang withstands up
to 100mA 30VDC)
- Gold plated brass contacts (CD):0,4VA 20VAC or DC
• Minimal load :
-Acontacts:50mA 10VDC
- AD and CD contacts:10mA 50mV - 10µA 5V
• Inial contact resistance:10mΩ max.
• Insulaon resistance:1.000 MΩ min. at 500VDC
• Dielectric strength : 1.000 Vrms 50Hz min. between terminals
1.500 Vrms 50Hz min. between terminals and frame
• Contact bounce:2ms max.
• Electrical life at full load : 50,000 cycles
• Low level or mechanical life:100,000 cycles
• Panel thickness:11.5 mm (.452) max.
• Operang temperature:-40°C to +85°C
MATERIALS
• Actuator : 6/6 nylon
so touch: thermoplasc elastomer
over 6/6 nylon
• Bushing : brass, chrome plated
• Contacts
A: silver
AD: silver, gold plated
CD: brass, gold plated
• Terminal seal:epoxy
Mounng accessories: Standard hardware supplied :1hex nut 20.64 mm (.813) across flats and1sealing gasket.
Packaging unit: 40 pieces per tray
Dimensions: First dimensions are in mm while inches are shown as bracketed numbers.
Note: The company reserves the right to change specificaons without noce.
PANEL CUT -OUT
8.13
(.320)
TERMINALS
21
(.043)
1.10
4.70
(.185)
1.80
1.90
(.043)
(.070)
(.122)
3.10
1.10
(.074)