FEATURES /
BENEFITS
p
Ultra slim design, less than 1/2” (13mm) high
p
70% lumen maintenance @ 50,000+ hr life @
25ºC
ambient temperature
p
Low energy use, no IR or UV emissions
p
Modular “quick connect” system for easy installation
p Designed for even LED spacing over linear runs, no
hotspots or dark spots between fixtures
p Cool to touch, suitable for direct mounting on flammable
surfaces
p Onboard constant current driver with low voltage input
p ETL listed to UL standards for dry locations
p Utilizes the latest high efficiency LED technology
CL2 SERIES
MDEXLUMCL2_A
APPLICATIONS
The CL2 Series is designed for use in a wide range of lighting applications, especially areas which benefit from its ultra slim
profile, low energy and long operating life. Designed around the latest LED technology, the CL2 series represents true
innovation in lighting, delivered in a package which blends seamlessly into it’s surroundings. Sample applications include, but not
limited to: Cove and cornice lighting, shelf lighting, integrated into furniture, under counters, stair hand rails, display cases, task lighting.
OPERATING CONDITIONS
MATERIALS/FINISH
p Ambient temperature -20ºC to +40ºC (-4ºF to +104ºF)
p Anodized aluminum module base with polycarbonate lens
p Plug & play connector system
p Onboard constant current driver
p 4 high output 1W LEDs per module
p 20AWG, PTFE cable - UL rated E213967, 300V, 80ºC
p Input voltage 24VDC. Use only class 2 power supplies
p Power consumption 5.3W per module
Does not include power supply losses
p Max # of modules connected per run = 20. Up to 16
modules can be operated on a 100W power supply
ORDERING INFORMATION
Connectors (sold separately)
CL2-E2E = End to end module connector CL2-START = 3m / 9’ 10” start cable (supplies power to first module)
CL2-FLEX = 63mm / 2.5” flexible end to end connector CL2-END = End plug
CL2-EXTEND = 952mm / 37.5” flexible end to end connector
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
PRIVATE LABEL
OEM PROGRAM
Dialight Lumidrives
York House • Weatherby Road • Long Marston, York, YO26 7NH
Tel: 0845 6346161 • Fax: 0845 6346160 • www.dialight.com
LED Color
Catalog
Number
(A)
Typical
CCT
Min Luminous
Flux per Module
(lumens)
Typical Luminous
Flux per Module
(lumens)
CRI
Lens
(B)
Cool White C 5000K 288 342 75
C = Clear
Neutral White N 4100K 242 288 75
Warm White W 3000K 204 242 75
F = Frosted
High CRI Warm White Z 3000K 171 204 92
Note: Special colors available, consult factory.
LED data is LED manufacturers test data at 25
º
C Tj. Light output at max acceptable ambient temp will be approximately
15-20% lower depending on the thermal conductivity of the mounting surface. Clear lens will reduce fixture light output by
additonal 8-10%, and frosted lens by additional 30%.
Frosted Lens Version
