3215054 Datasheet 3215054 | P1-P3

https://www.phoenixcontact.com/pi/products/3215054

08/18/2018Page1/5

Ground modular terminal block-UT 10-PE/S-3215054

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Ground modular terminal block, with screwfix, connection method: Screw connection, number of connections:

2, cross section:0.5 mm²-16 mm², AWG:20-6, width: 10.2 mm, height: 46.9 mm, color: green-yellow,

mounting type: NS 35/7,5, NS 35/15

The figure shows a similar product

Key Commercial Data

Packing unit 50 STK

Minimum order quantity 50 STK

GTIN

GTIN 4046356633703

Technical data

General

Number of levels 1

Number of connections 2

Nominal cross section 10 mm²

Color green-yellow

Insulating material PA

Flammability rating according to UL 94 V0

Rated surge voltage 8 kV

Degree of pollution 3

Overvoltage category III

Insulating material group I

Open side panel Yes

Oscillation, broadband noise test result Test passed

Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03

Test spectrum Service life test category 2, bogie-mounted

Test frequency

= 5 Hz to f

= 250 Hz

ASD level

6.12 (m/s

)

/Hz

https://www.phoenixcontact.com/pi/products/3215054

08/18/2018Page2/5

Ground modular terminal block-UT 10-PE/S-3215054

Technical data

General

Acceleration 3.12 g

Test duration per axis 5 h

Test directions X-, Y- and Z-axis

Shock test result Test passed

Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03

Shock form Half-sine

Acceleration 30g

Shock duration 18 ms

Number of shocks per direction 3

Test directions X-, Y- and Z-axis (pos. and neg.)

Relative insulation material temperature index (Elec., UL 746 B) 130 °C

Temperature index of insulation material (DIN EN 60216-1 (VDE

0304-21))

130 °C

Static insulating material application in cold -60 °C

Behavior in fire for rail vehicles (DIN 5510-2) Test passed

Flame test method (DIN EN 60695-11-10) V0

Oxygen index (DIN EN ISO 4589-2) >32 %

NF F16-101, NF F10-102 Class I 2

NF F16-101, NF F10-102 Class F 2

Surface flammability NFPA 130 (ASTM E 162) passed

Specific optical density of smoke NFPA 130 (ASTM E 662) passed

Smoke gas toxicity NFPA 130 (SMP 800C) passed

Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg

Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3

Dimensions

Width 10.2 mm

End cover width 2.2 mm

Length 47.7 mm

Height 46.9 mm

Height NS 35/7,5 47.5 mm

Height NS 35/15 55 mm

Connection data

Note Please observe the current carrying capacity of the DIN rails.

Connection method Screw connection

Connection in acc. with standard IEC 60947-7-2

Note

Note: Product releases, connection cross sections and notes on

connecting aluminum cables can be found in the download area.

https://www.phoenixcontact.com/pi/products/3215054

08/18/2018Page3/5

Ground modular terminal block-UT 10-PE/S-3215054

Technical data

Connection data

Conductor cross section solid min. 0.5 mm²

Conductor cross section solid max. 16 mm²

Conductor cross section AWG min. 20

Conductor cross section AWG max. 6

Conductor cross section flexible min. 0.5 mm²

Conductor cross section flexible max. 16 mm²

Min. AWG conductor cross section, flexible 20

Max. AWG conductor cross section, flexible 6

Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²

Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm²

Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²

Conductor cross section flexible, with ferrule with plastic sleeve max. 10 mm²

Connection in acc. with standard IEC/EN 60079-7

Conductor cross section solid min. 0.5 mm²

Conductor cross section solid max. 16 mm²

Conductor cross section AWG min. 20

Conductor cross section AWG max. 6

Conductor cross section flexible min. 0.5 mm²

Conductor cross section flexible max. 10 mm²

Stripping length 10 mm

Internal cylindrical gage A6

Screw thread M4

Tightening torque, min 1.5 Nm

Tightening torque max 1.8 Nm

Standards and Regulations

Connection in acc. with standard IEC 60947-7-2

Flammability rating according to UL 94 V0

Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3

Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3

Environmental Product Compliance

REACh SVHC Lead 7439-92-1

China RoHS Environmentally Friendly Use Period = 50

For details about hazardous substances go to tab “Downloads”,

Category “Manufacturer's declaration”

Drawings

P1-P3 P4-P5

3215054

Mfr. #:

Buy 3215054

Manufacturer:

Phoenix Contact

Description:

DIN Rail Terminal Blocks UT 10-PE/S

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

3215054