J0012D21 Datasheet J0026D01F, J0012D21, J0024D21B | P1-P3

1 J403.A (1/05)

US 619 674 8100

••

UK 44 1483 401 700

••

France 33 3 84 35 04 04

••

Singapore 65 6287 8998

••

Taiwan 886 2 2698 0228

••

Hong Kong 852 2788 6588

••

http://www.pulseeng.com

Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C

Insertion Return Loss Common Mode

Part

Turns

1,2

EMI

LEDs

Loss (dB TYP)

Crosstalk

Rejection

Hipot

Number

Ratios

Fingers (

L/R)

(dB TYP) 100 Ω ±15 Ω

(dB TYP)

(Vrms)

TX RX 1-65 MHz 1-10 MHz 10-30 MHz 30-60 MHz 60-80 MHz 1-30 MHz 30-60 MHz 60-100 MHz 1-50 MHz 50-150 MHz @60Hz 1 MIN

J0006D01B 1CT:1 1CT:1 No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0006D21 1CT:1 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0006D21B 1CT:1 1CT:1 YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0011D01 1CT:1 1CT:1 No N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0011D01B 1CT:1 1CT:1 No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0011D21 1CT:1 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0011D21B 1CT:1 1CT:1 YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0011D21E 1CT:1 1CT:1 YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0012D21 1CT:1 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0018D21 1CT:1.414 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0018D21E 1CT:1.414 1CT:1 YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0024D21 1CT:2 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0024D21B 1CT:2 1CT:1 YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0026D01 1CT:1 1CT:1 No N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0026D01B 1CT:1 1CT:1 No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0026D01E 1CT:1 1CT:1 No G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0026D01F

1CT:1 1CT:1 No Y/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0026D21 1CT:1 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0026D21B 1CT:1 1CT:1 YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0026D21E 1CT:1 1CT:1 YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0026D21F

1CT:1 1CT:1 YES Y/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0026D21G

1CT:1 1CT:1 YES YG/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0033D21 1.25CT:1 1CT:1 YES N/A -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0035D21B 1CT:1 1CT:1 YES G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0048D21M 1CT:1 1CT:1 YES G/G -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

J0073D01B 1CT:2.5 1CT:1 No G/Y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500

PULSE

JACK

1x1 Tab-DOWN RJ45

www.pulseeng.com

Features and Benefits:

RoHS “NL” peak solder rating 260°C, non-RoHS peak solder rating 235°C

Available with or without LEDs

Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP

For RoHS part, add suffix NL

Electrical Performance Summary:

Internal magnetics options available

Meets or exceeds IEEE 802.3 standard for 100Base-T

350 µH minimum OCL with 8 mA bias current

Minimum 1500 Vrms isolation per IEEE 802.3 requirement

Description:

10/100 Base-TX RJ45 1x1 Tab-DOWN with LEDs 8-pin (J0 series) integrated magnetics connector (ICM), designed to

support applications, such as SOHO (ADSL modems), LAN-on-Motherboard (LOM), Hub and Switches.

Notes: 1. Both transmit and receive channels meet IEEE 802.3 specifications.

2. Different electrical and mechanical specifications can be accommodated.

3. LEDs Left/Right: G=green, Y=yellow, N/A=none, YG=Bi-color LED Yellow Green.

4. LEDs with internal resistor.

5. Bi- color Left LED.

6. For an explanation of EMI fingers, please refer to the mechanical drawing page.

Notes: 1.All connector part numbers starting with the series prefix J0 comply to the above limits.

2. Connector dimensions comply with FCC dimension requirements.

Mating Force Unmating Force Plug to Jack

Part Number

(MAX) (MAX)

Durability

Retention (MIN)

J0 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs.

RJ45 Durability Testing Rating

Part

Shield Contact Housing

Number

Material Finish Material Plating Area Solder Area Material Specification

J0 10-20m inches Nickel over Phosphor Nickel underplating and 120µ inches Sn90/Pb10

Series

Brass

10-20m inches Brass Bronze selective gold plating 15µ inches over 50µ inches nickel

Thermoplastic UL 94 V-0

RJ45 Material Specification

TD+ 1

CT 4

TD- 2

RD+ 3

CT 5

RD- 6

6 RX-

3 RX+

2 TX-

1 TX+

1CT : 1

TRANSMIT

1CT : 1

RECEIVE

CABLE SIDE

PCB SIDE TO PHY

0.001mF

1CT : 1

RECEIVE

6 RX-

3 RX+

2 TX-

1 TX+

TD+ 1

CT 4

TD- 2

RD+ 3

CT 5

RD- 6

NC 7

1CT : 1

TRANSMIT

CABLE SIDE

PCB SIDE TO PHY

CHS

GROUND

NOTE: Connect CHS GND to PCB ground.

0.001mF

1CT : 1

RECEIVE

6 RX-

3 RX+

2 TX-

1 TX+

TD+ 1

CT 2

TD- 4

RD+ 3

CT 5

RD- 6

NC 7

1CT : 1

TRANSMIT

CABLE SIDE

PCB SIDE TO PHY

CHS

GROUND

NOTE: Connect CHS GND to PCB ground.

PULSE

JACK

1x1 Tab-DOWN RJ45

J403.A (1/05) 2

US 619 674 8100

••

UK 44 1483 401 700

••

France 33 3 84 35 04 04

••

Singapore 65 6287 8998

••

Taiwan 886 2 2698 0228

••

Hong Kong 852 2788 6588

••

http://www.pulseeng.com

J0 Series Mechanicals

www.pulseeng.com

.350

8,89

.100

2,54

.120

3,05

.250

6,35

.100

2,54

.024

0,61

.398

10,11

.450

11,43

.620

15,75

.498

12,65

7531

.003

0,08

.035

0,89

.064

1,63

.040

1,02

.128

3,25

.193

4,90

.133

3,38

.050

1,27

FRONT

BACK

HOUSING POST

SHIELD PIN

.560

14,22

TOP OF PCB

TO BOTTOM

OF OPENING

.010

0,25

2.54

6,45

MAX

.010

0,25

.660

16,76

Viewed from PCB Component side

J0 Series Electrical Schematics

J0006

J0011 J0012

Patent Pending

Date Code

Country of Origin

JXXXXXXXX

.545

13,84

LEFT LED

RIGHT LED

.640

16,26

.140

3,56

SHIELD PIN

.290

7,37

425

10,80

.020

0,51

.135

3,43

.020

0,51

.125

3,18

.020

0,51

.125

3,18

SIGNAL PINS

HOUSING POST

.850

21,59

MAX

FRONT VIEW

Connector Marking

(An example - parts are marked on

the top or end surface as shown)

BACK

FRONT

SIDE VIEW

EMI Fingers

Part Number

Location

Dimensions:

Inches

Unless otherwise specified,

all tolerances are ±

.010

0,25

J0 Series Electrical Schematics (continued)

PULSE

JACK

1x1 Tab-DOWN RJ45

3 J403.A (1/05)

US 619 674 8100

••

UK 44 1483 401 700

••

France 33 3 84 35 04 04

••

Singapore 65 6287 8998

••

Taiwan 886 2 2698 0228

••

Hong Kong 852 2788 6588

••

http://www.pulseeng.com

www

.pulseeng.com

0.001mF 2Kv

1CT : 1

RECEIVE

6 RX-

3 RX+

2 TX-

1 TX+

TD+ 1

CT 2

TD- 3

RD+ 4

CT 5

RD- 6

NC 7

1CT : 1

TRANSMIT

CABLE SIDE

PCB SIDE TO PHY

CHS

GROUND

NOTE: Connect CHS GND to PCB ground.

0.001mF

1CT : 1

RECEIVE

6 RX-

3 RX+

2 TX-

1 TX+

TD+ 1

CT 4

TD- 2

RD+ 3

CT 5

RD- 6

NC 7

CABLE SIDE

PCB SIDE TO PHY

CHS

GROUND

NOTE: Connect CHS GND to PCB ground.

1CT :

TRANSMIT

J0018

LED Configuration

LED = B & E Specification

(LEDs without internal resistors)

Right LED

Left LED

LED = M Specification

(LEDs without internal resistors)

Left LED

Right LED

LED = F Specification

(LEDs with internal resistors)

Right LED

Left LED

LED = G Specification

(Bi-color LED option with internal resistors)

Left LED

Right LED

6 RX-

3 RX+

2 TX-

1 TX+

TD+ 1

CT 3

TD- 2

RD+ 7

CT 6

RD- 8

1.25CT : 1

TRANSMIT

1CT : 1

RECEIVE

0.001mF

CABLE SIDE

PCB SIDE TO PHY

CHS GROUND

NOTE: Connect CHS GND to PCB ground.

6 RX-

3 RX+

2 TX-

1 TX+

TD+ 1

CT 3

TD- 2

RD+ 7

CT 6

RD- 8

1CT : 2.5

TRANSMIT

1CT : 1

RECEIVE

0.001mF

CABLE SIDE

PCB SIDE TO PHY

CHS GROUND

NOTE: Connect CHS GND to PCB ground.

J0033

J0073

TD+ 1

CT 4

TD- 2

RD+ 3

CT 5

RD- 6

6 RX-

3 RX+

2 TX-

1 TX+

1CT : 1

RECEIVE

CABLE SIDE

PCB SIDE TO PHY

1CT : 2

TRANSMIT

CABLE SIDE

PCB SIDE TO PHY

CHS GROUND

NOTE: Connect CHS GND to PCB ground.

TD+ 1

CT 3

TD- 2

RD+ 7

CT 6

RD- 8

6 RX-

3 RX+

2 TX-

1 TX+

1CT : 1

TRANSMIT

1CT : 1

RECEIVE

0.001mF

6 RX-

3 RX+

2 TX-

1 TX+

TD+ 8

CT 6

TD- 7

RD+ 2

CT 3

RD- 1

1CT :1

TRANSMIT

1CT :1

RECEIVE

0.001mF

CABLE SIDE

PCB SIDE TO PHY

CHS GROUND

NOTE: Connect CHS GND to PCB ground.

Yellow 585 nm 2.5 V 2.1 V

Green 565 nm 2.5 V 2.2 V

Standard LED Wavelength Forward* V(MAX) (TYP)

* Using an internal resistor within the LED increases the voltage rating of the

diode from 2.5 V to 5.0 V (assumes bias current = 20 mA).

J0024 J0026

J0048

J0035

P1-P3 P4-P4

J0012D21

Mfr. #:

Buy J0012D21

Manufacturer:

Pulse Electronics

Description:

Modular Connectors / Ethernet Connectors 1X1 TAB DOWN 10/100

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

J0012D21

J0012D21

Products related to this Datasheet