SpecNo.JELF243A-9133-01 P.6/12
MURATA MFG.CO., LTD
Reference Only
7. Q200 Requirement
7.1.Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June 1. 2010
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours at room
temperature, then
measured.
Meet Table A after testing.
Table A
4 Temperature
Cycling
1000cycles
-40 deg C to +125 deg C
Set for 24hours at room
temperature,then
measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 deg C,
85%RH
unpowered..
Meet Table A after testing.
8 Operational Life Apply Rated Current 125
deg C 1000hours
Set for 24hours at room
temperature, then
measured
Meet Table A after testing.
9 External Visual Visual inspection
No abnormalities
10 Physical
Dimension
Meet ITEM 4
（Style and Dimensions）
No defects
12 Resistance
to Solvents
Per
MIL-STD-202
Method 215
Not Applicable
13 Mechanical
Shock
Per MIL-STD-202
Method 213
Condition C : 100g’s(0.98N),
6ms, Half sine, 12.3ft/s
Meet Table A after testing.
14 Vibration 5g's(0.049N) for 20 minutes,
12cycles each of 3
orientations
Test from 10-2000Hz.
Meet Table A after testing.
15 Resistance
to Soldering
Heat
No-heating
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating: 150C +/-10 deg C, 60s to 90s
Meet Table A after testing.
17 ESD
Per AEC-Q200-002 ESD Rank: Refer to Item 3. Rating.
Meet Table A after testing.
18 Solderbility Per J-STD-002
Method b : Not Applicable
95% of the terminations is to be soldered.
(Except exposed wire)
Appearance No damage
Inductance
(at 100MHz)
Within ±5％
