SPECIFICATION CONTROL DRAWING
THERMOFIT
DEVICES
Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE*
SHIELD TERMINATOR
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE IN BETWEEN BRACKETS.
DOCUMENT NO.:
D-144-00/-01/-02
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should
evaluate the suitability of the product for
their application.
DCR NUMBER:
D981312
REPLACES:
D961395
DRAWN BY:
R. MAPALO
DATE:
07/14/98
REV.:
SEE TABLE
DOC ISSUE:
4
SCALE:
NONE
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision
Product Revisions Product Dimensions Cable Dimensions
Product Names L
max
A
min
B
min
D
max
E
min
J±0.5
(±0.02)
M±0.5
(±0.02)
D-144-00 N 15.75
(0.620)
2.8
(0.110)
3.2
(0.125)
3.2
(0.125)
0.9
(0.035)
6
(0.235)
7
(0.275)
D-144-01 K 15.75
(0.620)
4.6
(0.180)
5.1
(0.200)
5.1
(0.200)
1.8
(0.070)
6
(0.235)
7
(0.275)
D-144-02 L 15.75
(0.620)
7.1
(0.280)
7.6
(0.300)
7.6
(0.300)
3.6
(0.140)
6
(0.235)
7
(0.275)
MATERIAL
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI J-STD-004.
3. & 4. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: blue.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting
the dimensional criteria listed and having tin or silver plated shields.
2. Temperature range: -55°C to +150°C.
3. Install using Raychem-approved infrared heating tools in accordance with Raychem Process standard RCPS-100-70.
4. Assemblies will meet requirements of Raychem specification RT-1404 and National Aerospace Standard NAS-1747.
For best results, prepare the cable as shown:
2) END STRIP 1) WINDOW STRIP
*A trademark of Raychem Corporation.
