https://www.phoenixcontact.com/pi/products/1421710
08/18/2018Page2/3
Sensor/actuator cable-SAC-17P-20,0-PUR/FS SCO-1421710
Technical data
General
Status display No
Protective circuit/component Unwired
Overvoltage category II
Degree of pollution 3
Material
Flammability rating according to UL 94 V0
Contact material CuZn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Material of grip body TPU, hardly inflammable, self-extinguishing
Material, knurls Zinc die-cast, nickel-plated
Sealing material NBR
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
Resistance to oil DIN VDE 0472 Part 803, test type B
Other resistance Hydrolysis and microbe resistant as per VDE 0282 section 10
Flammability rating according to UL 94 V0
Cable
Conductor cross section 17x 0.14 mm² (Signal line)
AWG signal line 26
Conductor structure signal line 18x 0.10 mm
Core diameter including insulation 1 mm ±0.05 mm (Signal line)
Wire colors
white, brown, green, yellow, gray, pink, blue, red, black, violet, gray-pink,
red-blue, white-green, brown-green, white-yellow, yellow-brown, white-
gray
Overall twist 17 wires twisted in layers
External sheath, color black RAL 9005
External cable diameter D 8 mm
Number of bending cycles 4000000
Bending radius 60 mm
Traversing path 10 m
Traversing rate 3 m/s
Acceleration 10 m/s²
Outer sheath, material PUR
Material conductor insulation PP
Conductor material Tin-plated Cu litz wires
Conductor resistance 142 Ω/km
Special properties Low adhesion surface
Resistance to oil DIN VDE 0472 Part 803, test type B
