DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE
DESIGNATED.
Revision:
Date:
0024K0214
SPECIFICATION CONTROL DRAWING
CHEMINAX
THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200.
ADDITIONAL REQUIREMENTS
CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS
100 OHM, AWG 24, 19 STRANDS OF AWG 36,
TWIN CONDUCTOR CABLE, OUTER SPACE USE
SHIELD
AWG 38,
Silver-Coated Copper
JACKET
Radiation-Crosslinked,
Modified PVF
2
.143
.119
.035
.051
.025
CONDUCTOR
AWG 24, 19 Strands of
AWG 36, Silver-Coated
High Strength Copper
Alloy
FILLERS
Radiation-Crosslinked
Modified ETFE
DIELECTRICS
Rayfoam
®
L
Colors - Tan / White
ELECTRICAL
CONDUCTOR RESISTANCE 26.5 ohms/1000 ft. (nominal)
INSULATION RESISTANCE 10,000 megohms (minimum)
for 1000 ft.
JACKET FLAWS
SPARK TEST 1.0 kV (rms)
IMPULSE TEST 6.0 kV (peak)
VOLTAGE WITHSTAND
(DIELECTRIC) 1000 volts (rms)(minimum)
ENVIRONMENTAL
FLAMMABILITY Method B
HEAT SHOCK 225°C
LOW TEMPERATURE- -55°C/4.00 inch mandrel
COLD BEND
VOLTAGE WITHSTAND
(POST ENVIRONMENTAL) 1000 volts (rms), for 1 minute
PHYSICAL
INSULATION (DIELECTRIC)
(Prior to cabling)
ELONGATION 50% (minimum)
TENSILE STRENGTH 1000 lbf/in² (minimum)
JACKET
ELONGATION 200% (minimum)
TENSILE STRENGTH 4000 lbf/in² (minimum)
JACKET THICKNESS .012 inch (nominal)
SHIELD COVERAGE 90% (minimum)
WEIGHT 15.3 lbs/1000 ft. (nominal)
OUTER SPACE REQUIREMENTS
RADIATION RESISTANCE 500 megorads / 4.25 inch mandrel
VACUUM STABILITY
TOTAL MASS LOSS (TML) 1.0% (maximum)
VOLATILE CONDENSABLE 0.1% (maximum)
MATERIAL (VCM)
CHARACTERISTIC IMPEDANCE 100 ± 7 ohms, Method C at 1 MHz
CAPACITANCE - MUTUAL 14.5 pF/ft. (nominal) at 1 MHz
VELOCITY OF PROPAGATION 76% (nominal)
Outer jacket color will be white (designated by a "9" appended
to the part number, e.g. 0024K0214-9) unless otherwise specified.
07-24-06
C
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
501 Oakside Avenue
Redwood City, California 94063-3800
1-800-227-8816 Fax: 1-650-361-6297
RR
RR
R
Wire & Cable
© 2006 Tyco Electronics Corporation. All rights reserved.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
Designate outer jacket color with a dash number in accordance
with MIL-STD-681. Other codes and suffixes may be added to the
part number, as necessary, to capture any additional requirements
imposed by the purchase order.
