MAX971–MAX974/MAX981–MAX984
Ultra-Low-Power, Open-Drain,
Single/Dual-Supply Comparators
4 _______________________________________________________________________________________
ELECTRICAL CHARACTERISTICS—3V OPERATION (continued)
(V+ = 3V, V- = GND = 0V, T
A
= T
MIN
to T
MAX
, unless otherwise noted. Typical values are at T
A
= +25°C.) (Note 1)
Note 1: The MAX972EBL is 100% tested at T
A
= +25°C. Temperature limits are guaranteed by design.
Note 2: MAX974/MAX984 comparators work below 2.5V; see Low-Voltage Operation section for more details.
Note 3: Low-to-high response time is the result of the 1MΩ pullup and the 100pF capacitive load, based on three time constants.
A faster response time is achieved with a smaller RC.
PARAMETER CONDITIONS MIN TYP MAX UNITS
Overdrive = 10mV 12
Response Time (High-to-Low
Transition)
T
A
= +25°C, 100pF load,
1MΩ pullup to V+
Overdrive = 100mV 4
µs
Response Time (Low-to-High
Transition) (Note 3)
T
A
= +25°C, 100pF load, 1MΩ pullup to V+ 300 µs
MAX9_2/MAX9_3, I
OUT
= 0.8mA V- + 0.4
Output Low Voltage
MAX9_1/MAX9_4, I
OUT
= 0.8mA GND + 0.4
V
Output Leakage Current V
OUT
= 11V 100 nA
REFERENCE
C temp range 1% 1.170 1.182 1.194
MAX971/MAX973/
MAX974
E temp range 2% 1.158 1.206
C temp range 2% 1.158 1.182 1.206
Reference Voltage
MAX981–MAX984
E temp range 3% 1.147 1.217
V
T
A
= +25°C1525
Source Current
C/E temp ranges 6
µA
T
A
= +25°C815
Sink Current
C/E temp ranges 4
µA
Voltage Noise 100Hz to 100kHz 100 µV
RMS