RJ (ARJ)
–2–
ASCTB105E 201407-T
2) Tape and reel packing
Standard packing: 500 pcs. in an inner package; 1,000 pcs. in an outer package
Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3-pin side) is also available. Suffix “X” instead of “Z”.
RATING
1. Coil data
1) Single side stable
2) 2 coil latching
2. Specifications
Note: * The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to “AMBIENT ENVIRONMENT” in
GENERAL APPLICATION GUIDELINES.
Contact
arrangement
Nominal coil voltage
Part No.
Single side stable 2 coil latching
2 Form C
3 V DC ARJ20A03Z ARJ22A03Z
4.5 V DC ARJ20A4HZ ARJ22A4HZ
12 V DC ARJ20A12Z ARJ22A12Z
24 V DC ARJ20A24Z ARJ22A24Z
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 70°C 158°F)
3 V DC
75%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
66.6 mA 45 Ω
200 mW
110%V of nominal
voltage
4.5 V DC 44.4 mA 101.2 Ω
12 V DC 16.6 mA 720 Ω
24 V DC 8.3 mA 2,880 Ω
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 70°C 158°F)
3 V DC
75%V or less of
nominal voltage
(Initial)
75%V or less of
nominal voltage
(Initial)
50 mA 60 Ω
150 mW
110%V of nominal
voltage
4.5 V DC 33.3 mA 135 Ω
12 V DC 12.5 mA 960 Ω
24 V DC 6.3 mA 3,840 Ω
Characteristics Item Specifications
Contact
Arrangement 2 Form C
Contact material Gold plating
Initial contact resistance, max. Max. 150mΩ (By voltage drop 10V DC 10mA)
Rating
Contact rating 1W (at 5GHz, Impedance 50Ω, V.S.W.R. 1.25) 10mA 10V DC (resistive load)
Contact carrying power 1W (at 5GHz, Impedance 50Ω, V.S.W.R. 1.25)
Max. switching voltage 30V DC
Max. switching current 0.3A DC
Nominal operating power Single side stable: 200mW, 2 coil latching: 150mW
High frequency
characteristics
(Initial) (~5GHz,
Impedance 50Ω)
V.S.W.R. Max. 1.25
Insertion loss (without D.U.T. board’s loss) Max. 0.5dB
Isolation
Between open contacts Min. 35dB
Between contact sets Min. 30dB
Input power 1W (at 5GHz, impedance 50Ω, V.S.W.R. 1.25, at 20°C)
Electrical
characteristics
Insulation resistance (Initial)
Min. 500MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Breakdown
voltage
(Initial)
Between open contacts 500 Vrms for 1min. (Detection current: 10mA)
Between contact sets 500 Vrms for 1min. (Detection current: 10mA)
Between contact and coil 500 Vrms for 1min. (Detection current: 10mA)
Between coil and earth terminal 500 Vrms for 1min. (Detection current: 10mA)
Between contact and earth terminal 500 Vrms for 1min. (Detection current: 10mA)
Temperature rise (at 20°C)
Max. 50°C (By resistive method, nominal voltage applied to the coil, 5GHz,
V.S.W.R. 1.25)
Operate time [Set time] (at 20°C) Max. 5ms (Nominal operating voltage applied to the coil, excluding contact bounce time.)
Release time [Reset time] (at 20°C)
Max. 5ms (Nominal operating voltage applied to the coil, excluding contact bounce time.)
(without diode)
Mechanical
characteristics
Shock
resistance
Functional Min. 500 m/s
2
(Half-wave pulse of sine wave: 6ms; detection time: 10μs.)
Destructive Min. 1,000 m/s
2
(Half-wave pulse of sine wave: 11ms.)
Vibration
resistance
Functional 10 to 55 Hz at double amplitude of 3mm (Detection time: 10μs.)
Destructive 10 to 55 Hz at double amplitude of 5mm
Expected life
Mechanical Min. 10
7
(at 180 cpm)
Electrical
Min. 10
6
(at 20 cpm) (1W, at 5GHz, V.S.W.R. 1.25)
Min. 10
6
(at 20 cpm) (10mA 10V DC resistive load)
Conditions Conditions for operation, transport and storage*
Ambient temperature: –30°C to +70°C –22°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight Approx. 3 g .11 oz
