1
Fuseholder Blocks & Clips
OGN
www.schurter.com /PG02
Fuses
Fuseholder Open Design, 5 x 20 mm, THT, var. Covers, IEC 60335-1
250 VAC · 4 W / 10 A (VDE) · 500 V · 10 A (UL/CSA)
Description
- For appliances in unattended use
- Glow wire tests acc. to IEC 60695-2-12 and -13
- Low profile fuse block with insulation walls
Standards
- IEC 60127-6
- UL 4248-1
- CSA C22.2 no. 4248.1
Approvals
- VDE Certificate Number: 40001042
- UL File Number: E39328
Applications
- Household appliances
Weblinks
pdf datasheet, html-datasheet, General Product Information, Packaging
details, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS,
REACH, Distributor-Stock-Check, Accessories, Detailed request for
product
Technical Data
Fuse-Link 5 x 20 mm
Mounting PCB
Attachment Screw, rivet or THT
Terminal Solder THT
Rated Voltage 250 VAC (VDE), 500 V (UL/CSA)
Rated current 10 A (VDE), 10 A (UL/CSA)
Rated Power Acceptance IEC 4 W / 10 A @ Ta 23 °C
2.5 W / 10 A with transparant cover, see
derating curves
Degree of Protection IP 20 (with cover)
Protection Class Suitable for appliances with protection
class I or II acc. to IEC 61140
Admissible Ambient Air Temp. -40 °C to 85 °C
Climatic Category 40/085/21 acc. to IEC 60068-1
Material: Socket see variants
Material: Cover Thermoplastic UL 94V-0
Material: Terminals Tin-Plated Copper Alloy
Unit Weight 1.7 g
Storage Conditions 0 °C to 60 °C, max. 70% r.h.
Product Marking , Type, Rated Voltage, Rated current,
Power Rating, Dielectric strength
Soldering Methods Wave
Soldering Profile
Solderability 245 °C / 3 sec acc. to IEC 60068-2-20,
Test Ta, method 1
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 1
Contact Resistance ≤ 10 mΩ at 20 mV acc. to IEC 60127-6
Dielectric Strength > 3 kV between Life parts
(50 Hz; 1 min)
Impulse Withstand Voltage > 4 kV between Life parts
Insulation Resistance ≥ 10 MΩ
(500 VDC; 1 min)
Overvoltage Category III acc. to IEC 60664-1
Pollution Degree 3 acc. to IEC 60664-1
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in
General Product Information