www.panduit.com
Pan-Way
®
Hinged LDPH Raceway
SPECIFICATION SHEET
specifications
LDPH non-metallic series is a power rated, single channel,
pre-assembled two-piece hinged cover design surface raceway.
It shall be suitable for use in applications up to 600 volts, shall
include adhesive backing and shall be made of impact resistant
material with a smooth finish that shall not scratch, peel or
corrode. The raceway shall include an assortment of bend
radius and standard fittings that complement the offering to
help route, protect and conceal power or low voltage cabling.
LDPH raceway shall be available in three sizes and four
standard colors that shall be optimized for use with the
Panduit
®
Pan-Net
®
communication system.
applications
Pan-Way
®
LDPH Surface Raceway is
designed to provide an easy and economical
solution for routing any power or low voltage
cable along perimeter walls, baseboards or
ceilings. This raceway is the perfect solution
for schools, hospitals, offices, homes or
anywhere a small, secure, low profile
raceway is needed.
technical information
Material:
Rigid PVC
Flammability:
UL94V-0; FT4
Voltage Rating:
UL5A/CSA C22.2 No. 62.1-03 600V
Approvals:
c-UL-us UL Listed 95425 (raceway); UL Listed E116129 (fittings)
NEC:
Article 388
Color:
Off White (IW), Electrical Ivory (EI), International Gray (IG), White (WH)
Capacity
Single-channel
Operating and
Storage Temperature
0 to 50° C
BRC Fittings:
Minimum 1" (25.4mm) bend radius
key features and benefits
Pre-assembled two-piece
hinged cover design:
Cover remains open without use of tools or fixtures; speeds
placement of cables into the raceway.
Non-slip liner cover:
Keeps cover from sliding when in an open position. Particularly
useful when product is used in vertical applications.
1" bend radius ttings: Fittings designed to maintain TIA/EIA bend radius requirements
are available.
Highly tamper resistant:
Difficult for untrained personnel to access the raceway. Provides
maximum security for communication cabling and maximum
safety for power cabling.
Adhesive backing:
Full length adhesive strip allows easy tool free installation and
works well for temporary mounting.
Mounting holes in base:
Eliminates need for drilling holes in raceway and
speeds installation
Available in different
sizes, lengths and colors:
Available sizes – LDPH3, LDPH5, LDPH10;
Available lengths – 6’,8’,10’.
Raceway is field paintable to match walls and surrounding décor.
Non-metallic
construction:
Lightweight, solid color throughout, high impact resistance, and
easy to cut with standard cutting tools.
Pan-Way® LDPH Raceway
Raceway LDPH3IW**-A
LDPH5IW**-A
LDPH10IW**-A
LDPH Fittings
Outside corner: OCFX*IW-X
Inside corner: ICFX*IW-X
Right angle: RAFX*IW-X
Tee: TFX*IW-X
Four-way cross: CRFX5IW-X
End cap: ECFX*IW-X
Drop ceiling/
entrance end: DCEFXIW-X
Right angle/
entrance end: RAEFXIW-X
LDPH5 TO LDPH3
reducer: RFX53IW-X
LDPH10 TO LDPH5
reducer: RFX105IW-X
LDPH10 TO LDPH3
reducer: RFX103IW-X
Coupler: CFX*IW-X
Surface Mount Outlet and
Junction Boxes
Single gang,
two-piece: JBP1IW
Single gang,
two-piece, deep: JBP1DIW
Single gang,
two-piece, extension: JBP1EIW
Single gang, two-piece,
intermediate: JBP1IIW
Single gang, two-piece,
snap on: JBP1FSIW
Single gang,
two-piece, round: RJBX3510IW
Double gang,
two-piece: JBP2IW
Double gang,
two-piece, deep: JBP2DIW
Double gang,
two-piece, divided: JBP2SIW
Double gang,
two-piece, snap on: JBP2FSIW
*Insert raceway size 3, 5 or 10.
**Insert raceway length of 6’, 8’ or 10’
All parts listed in Off White (IW) color. To order
other colors substitute Electrical Ivory (EI).
International Gray (IG), and White (WH). All
products shown are power rated up to 600V.
