TPS65-201A-S

IQ Switch
®
ProxSense
®
Series
Copyright © Azoteq (Pty) Ltd 2016
Trackpad Module Datasheet v1.02
Page 7 of 11
All rights reserved.
September 2016
3 TPS65
The TPS65 is a 65mm x 49mm rectangular trackpad with rounded corners. A representation of
the module is shown in Figure 3.1.
Figure 3.1 TPS48 Module Representation
Table 3.1 FPC connector pin out for TPS65.
J1 Connection
1
RDY
2
NRST
3
GND
4
VDDHI
5
SCL
6
SDA
4 Gestures and Implementation
The TPS65 and TPS43 provides filtered XY coordinates for up to 5 fingers, which makes it
ideal to be used for mouse pointer applications. It also supports gesture recognition, as shown
below. For more information about the gestures, see the IQS5xx-B000 datasheet:
http://www.azoteq.com/images/stories/pdf/iqs5xx-b000_trackpad_datasheet.pdf
4.1 Swipe Gestures
The trackpad modules can recognize 1 and 2 finger gestures. A valid gesture generates an
interrupt event.
Figure 4.1 Swipe Gestures
65.00
mm
s
0.2mm
IQ Switch
®
ProxSense
®
Series
Copyright © Azoteq (Pty) Ltd 2016
Trackpad Module Datasheet v1.02
Page 8 of 11
All rights reserved.
September 2016
4.2 Tap Gesture
The trackpad module can recognize a tap gesture, from a single finger or two fingers, at any
point on the trackpad surface. A valid tap generates an interrupt event.
Figure 4.2 Illustration of Tap Gesture
4.3 Tap and Hold Gesture
The trackpad module can recognize a tap & hold gesture, from a single finger or two fingers, at any
point on the trackpad surface. A valid tap & hold generates an interrupt event.
Figure 4.3 Tap & Hold Gesture
4.4 Swipe and Hold Gestures
The trackpad module recognizes four 1 and 2 finger swipe & hold gestures.
Figure 4.4 Swipe & Hold Gestures
4.5 Pinch & Zoom
A pinch gesture is reported when two touches move closer together, and a zoom gesture is
reported when they move apart.
IQ Switch
®
ProxSense
®
Series
Copyright © Azoteq (Pty) Ltd 2016
Trackpad Module Datasheet v1.02
Page 9 of 11
All rights reserved.
September 2016
Figure 4.5 Illustration of Pinch and Zoom Gesture
5 Specifications
5.1 Absolute Maximum Specifications
The following absolute maximum parameters are specified for the device:
Exceeding these maximum specifications may cause damage to the device.
x Operating temperature -40°C to 85°C
x Supply Voltage (VDDHI GND) 3.6V
x Minimum power-on slope 100V/s
x ESD protection ±2kV (Human body model)
5.2 Application Level Tests
According to the module design, with proper application system design implementation a 16kV
IEC air discharge and 1Vp-p Conducted Immunity level should be possible to achieve.
5.3 Power Consumption
Table 5.1 Trackpad Module General Operating Conditions
DESCRIPTION
MIN
TYP
MAX
UNIT
Supply voltage
1.65
3.3V
3.6
V
Tracking Mode
Current
-
TBD
mA
Low Power
Current
-
TBD
TBD
μ
A
Table 5.2 Start-up and shut-down slope Characteristics
DESCRIPTION
Conditions
PARAMETER
MIN
MAX
UNIT
Power On Reset
V
DDHI
Slope
100V/s
@25°C
V
POR
1.
44
1.65
V
Power Down Reset
V
DDHI
Slope
100V/s
@25°C
V
PDR
1.
30
1.60
V

TPS65-201A-S

Mfr. #:
Manufacturer:
Azoteq
Description:
Capacitance Touch Sensor Modules 65mm Rectangle Gesture Trackpad
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet