OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ACPL-M43T-500E

P1-P3P4-P6P7-P9P10-P10
ACPL-M43T
Wide Operating Temperature Automotive Digital Optocoupler
with R
2
Coupler® Isolation and 5-Pin SMT Package
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The ACPL-M43T is a single channel, high temperature, high
CMR, high speed digital optocoupler in a  ve lead minia-
ture footprint speci cally used in the automotive applica-
tions. The SO-5 JEDEC registered (MO-155) package outline
does not require “through holes” in a PCB. This package oc-
cupies approximately one-fourth the footprint area of the
standard dual-in-line package. The lead pro le is designed
to be compatible with standard surface mount processes.
This digital optocoupler uses an insulating layer between
the light emitting diode and an integrated photon detec-
tor to provide electrical insulation between input and
output. Separate connections for the photodiode bias
and output transistor collector increase the speed up to a
hundred times over that of a conventional photo-transistor
coupler by reducing the base-collector capacitance.
The ACPL-M43T has an increased common mode transient
immunity of 30kV/s minimum at V
CM
= 1500V over ex-
tended temperature range.
Avago R
2
Coupler® isolation products provide the re-
inforced insulation and reliability needed for critical in
automotive and high temperature industrial applications.
Functional Diagram
Features
Quali ed to AEC-Q100 Test Guidelines
Wide Temperature Range: -40C ~ 125C
High Temperature and Reliability IPM Driver for
Automotive Application
30 kV/s High Common-Mode Rejection
at V
CM
= 1500 V (typ)
Compact, Auto-Insertable SO5 Packages
High Speed: 1 MBd (Typ)
Low LED Drive Current: 10 mA (typ)
Low Propagation Delay: 300 ns (typ)
Worldwide Safety Approval:
UL1577 recognized, 4000 Vrms/1 min
CSA Approved
IEC/EN/DIN EN 60747-5-5
Applications
Automotive IPM Driver for DC-DC converters
and motor inverters
CANBus Communications Interface
High Temperature Digital/Analog Signal Isolation
Power Transistor Isolation
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this
component to prevent damage and/or degradation which may be induced by ESD. The components
featured in this datasheet are not to be used in military or aerospace applications or environments.
6
5
4
1
3
ANODE
CATHODE
V
CC
V
O
GND
Truth Table
LED
ON
OFF
Vo
LOW
HIGH
Note: The connection of a 0.1 F bypass capacitor between pins 4 and 6
is recommended.
2
Package Outline Drawings
ACPL-M43T Small Outline SO-5 Package (JEDEC MO-155)
Ordering Information
Part
number
Option
Package
Surface
Mount
Tape &
Reel
IEC/EN/DIN
EN 60747-5-5 Quantity
RoHS
Compliant
ACPL-M43T -000E SO-5 X 100 per tube
-060E X X 100 per tube
-500E X X 1500 per reel
-560E X X X 1500 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
ACPL-M43T-500E to order product of Mini- at Surface Mount 5-pin package in Tape and Reel packaging with RoHS
compliant.
Example 2:
ACPL-M43T to order product of Mini- at Surface Mount 5-pin package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
7.0 ± 0.2
(0.276 ± 0.008)
2.5 ± 0.1
(0.098 ± 0.004)
0.102 ± 0.102
(0.004 ± 0.004)
4.4 ± 0.1
(0.173 ± 0.004)
1.27
(0.050)
BSC
0.71
(0.028)
MIN.
0.4 ± 0.05
(0.016 ± 0.002)
3.6 ± 0.1*
(0.142 ± 0.004)
DIMENSIONS IN MILLIMETERS (INCHES)
* MAXIMUM MOLD FLASH ON EACH SIDE IS 0.15 mm (0.006)
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
7q MAX.
MAX. LEAD COPLANARITY
= 0.102 (0.004)
M43T
YWW
EE
Extended Datecode
for lot tracking
8.27
(0.325)
2.0
(0.080)
2.5
(0.10)
1.3
(0.05)
0.64
(0.025)
LAND PATTERN RECOMMENDATION
RoHS COMPLIANCE
INDICATOR
4.4
(0.17)
0.20
(0.008
+ 0.005
− 0.025
+ 0.002
− 0.001
)
3
Recommended re ow condition as per JEDEC Standard, J-STD-020 (latest revision).
Note: Non-halide  ux should be used.
Regulatory Information
The ACPL-M43T is approved by the following organizations:
UL Approved under UL 1577, component recognition program up to V
ISO
= 4000 V
RMS
CSA Approved under CSA Component Acceptance Notice #5.
IEC/EN/DIN EN 60747-5-5 Approved under: IEC 60747-5-5, EN 60747-5-5 & DIN EN 60747-5-5
IEC/EN/DIN EN 60747-5-5 Insulation Characteristics*
Description Symbol Characteristic Unit
Installation classi cation per DIN VDE 0110/1.89, Table 1
for rated mains voltage ≤ 150 V
rms
for rated mains voltage ≤ 300 Vrms
for rated mains voltage ≤ 600 V
rms
I – IV
I – III
I – II
Climatic Classi cation 40/125/21
Pollution Degree (DIN VDE 0110/1.89) 2
Maximum Working Insulation Voltage V
IORM
567 V
peak
Input to Output Test Voltage, Method b*
V
IORM
x 1.875=V
PR
, 100% Production Test with t
m
=1 sec, Partial discharge < 5 pC
V
PR
1063 V
peak
Input to Output Test Voltage, Method a*
V
IORM
x 1.6=V
PR
, Type and Sample Test, t
m
=10 sec, Partial discharge < 5 pC
V
PR
907 V
peak
Highest Allowable Overvoltage (Transient Overvoltage t
ini
= 60 sec) V
IOTM
6000 V
peak
Safety-limiting values – maximum values allowed in the event of a failure.
Case Temperature
Input Current
Output Power
T
S
I
S, INPUT
P
S, OUTPUT
175
230
600
°C
mA
mW
Insulation Resistance at T
S
, V
IO
= 500 V R
S
>10
9
* Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/EN/
DIN EN 60747-5-5) for a detailed description of Method a and Method b partial discharge test pro les.
Insulation and Safety Related Speci cations
Parameter Symbol ACPL-M43T Units Conditions
Minimum External
Air Gap (Clearance)
L(101) 5 mm Measured from input terminals to output terminals,
shortest distance through air.
Minimum External
Tracking (Creepage)
L(102) 5 mm Measured from input terminals to output terminals,
shortest distance path along body.
Minimum Internal
Plastic Gap
(Internal Clearance)
0.08 mm Through insulation distance conductor to conductor,
usually the straight line distance thickness between
the emitter and detector.
Tracking Resistance
(Comparative
Tracking Index)
CTI 175 V DIN IEC 112/VDE 0303 Part 1
Isolation Group
(DIN VDE0109)
IIIa Material Group (DIN VDE 0109)
P1-P3P4-P6P7-P9P10-P10

ACPL-M43T-500E

Mfr. #:
Buy ACPL-M43T-500E
Manufacturer:
Broadcom / Avago
Description:
High Speed Optocouplers 1MBd 30k V/us
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet