RACD06-500

LIGHTLINE
AC/DC-Converter
with 3 year Warranty
RACD06
6 Watt
Single
Output
6W AC-DC Class II LED Power Supply
350mA to 700mA CC/CV Output
ENEC, UL, RCM and CB Certified
Universal Input Voltage Range
Fused Input, Protected Output
3.75kVAC Isolation
Low Cost
3 Year Warranty
Features
LED Driver
Selection Guide
Part Nominal Input Current Output Output Max Efficiency
Number Input Voltage at full load Voltage Range Current # typ.
(VAC) (mA) (VDC) (mA) LEDs (%)
RACD06-350 universal 120 2.5-24 350 6 x 1W 79
RACD06-500 universal 120 2.5-15 500 12 x 0.5W 70
RACD06-700 universal 120 2.5-12 700 3 x 2W 72
Input Voltage Range 90-264VAC or 120-370VDC
Rated Power 6W nom. / 7.5W max.
Input Frequency Range 47-63 Hz
Power Factor Full Load, 115VAC/230VAC 0.4
Output Voltage Range 350mA CC 2.5 - 22VDC
0-300mA CV 24V typ.
500mA CC 2.5 - 13VDC
0-490mA CV 15V typ.
700mA CC 2.5 - 10VDC
0-600mA CV 12V typ.
Inrush Current (<2mS) 115VAC/230VAC 10A max.
Leakage Current 115VAC/240VAC - 60/50Hz 0.4mA typ.
Input Fuse (Built-in) Standard T2A
Input Current Full Load, Nominal Vin see table
Output Current Accuracy (combined Tolerance, Load Regulation and Line Regulation) ±10%
Minimum Load Open Circuit Protected 1 LED
Output Ripple 0.2Ap-p max.
Hold Up Time 18ms min.
Operating Frequency 132kHz max.
AC RMS Isolation Voltage I/P to O/P 3.75kV / 1 minute
Temperature Coefficient ±0.02%/°C typ.
Overload Protection 120% typ.
Short Circuit Protection Continuous Current Limit
Output Overvoltage Protection 350mA Version 24V Zener Diode Clamp
500mA Version 14V Zener Diode Clamp
700mA Version 12V Zener Diode Clamp
Overtemperature Protection Shutdown, Automatic restart after cooling down
Operating Temperature Range Ambient Temperature -20°C to +40°C
(free air convection, according to CE/UL) Case Temperature 70°C max.
Operating Temperature Range Ambient Temperature -20°C to +50°C
(free air convection, according to ENEC) Case Temperature 70°C max.
continued on next page
Description
Specifications
(typical at 25°C and after warm up time unless otherwise specified )
A compact universal input 6W constant current switching power module suitable for driving up to 12 high power
LEDs.The output (dual constant voltage / constant current mode) current limit is fixed at 350mA, 500mA or 700mA.
At lower output currents, the output is constant voltage.
UL-8750 Certified
EN 61347 Certified
ENEC Certified
E340696
RoHS
2011/65/EU
6/6
Refer to Application Notes
www.recom-power.com L-21REV: 0/2015
RACD06
Output Current
24V
350mA
Nominal Current Limit
22V
2.5V
300mA
CC
CV
CV
Output Current
Output Voltage
Nominal Current Limit
13V
500mA
15V
490mA
CV
CC
Output Current
12V
700mA
Nominal Current Limit
600mA
CV
CC
Output Voltage
10V
2.5V
2.5V
Output Voltage
FC 64.0
68.0
35.0
1.50
21.0
58.0
FC 12.0
13.0
tc
FC 11.5
Ø3.0 15.0
PRI
SEC
RACD06
Series
LIGHTLINE
AC/DC-Converter
Package Style and Pinning
Characteristics
Connections
CN1 Function
L VAC in (L)
N VAC in (N)
CN2 Function
+ LED+
- LED-
Tolerance
XX = +/-0.5mm
XX.X = +/-0.25mm
Storage Temperature Range -40°C to +85°C
Humidity 95% RH max.
IP Rating IP20, Indoor Use Only
Weight 34g
Packing Quantity 10pc
PCB Material (UL94V-0) Plastic Resin with Fibreglass
Case Material (UL94V-0) Plastic
Designed to meet Standards Electrical Lighting, EMC Emissions EN55015:2006 + A1: 2007 + A2:2009
Limits for Harmonics Emissions EN 61000-3-2:2006
EMC Compatability: Flicker and Voltage Variations EN 61000-3-3:2006
Electrical Lighting: EMC Immunity EN 61547:1995 + A1:2000
Class II Power Supply Safety UL1310
FCC FCC18A
Certifications LED Lighting Safety (E340696) UL8750
RCM (U21382) AS/NZS 61347.1:2002, IEC 61347-2-13
ENEC General Safety EN 61347-1: 2008
ENEC Safety of AC supplied Control Gear for LED Modules EN 61347-2-13: 2006
PSE J61347-1(H20), J61347-2-13(H21), J55015(H20)
Design Lifetime 25°C ambient >20 x 10³ hours in operation
Connections AC Input Screw terminal
LED Output Screw Terminal
Specifications
(typical at 25°C and after warm up time unless otherwise specified )
2 Mounting screws are included
Tc = Case Temperature Measuring Point
FC = Fixing Centers
Constant Current (CC) and Constant Voltage (CV) Graph
RACD06-350 RACD06-500
RACD06-700
Note:
All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime.
L-22 www.recom-power.comREV: 0/2015
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit
written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
Maximum Number of LED drivers
per circuit breakers
Condition Circuit Breaker Circuit Breaker Current
Typ 10A 16A 20A 25A
115VAC, 1Ohm
90° phase angle
C 221 247 337 430
230VAC, 1Ohm
90° phase angle
B 80 157 200 254
C 265 317 437 550

RACD06-500

Mfr. #:
Manufacturer:
RECOM Lighting
Description:
LED Power Supplies 6W 3-14V OUT LED DR
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet