CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
92
CAT.8100F
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Endurance
Tangent of loss angle (tan b)
Leakage Current ( 2)
ESR ( 1)
Test condition
Capacitance change
tan b
ESR( 1)
Leakage current ( 2)
105°C, rated voltage 2000Hrs.
Within ±20% of initial value before test
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
Specifications
Performance CharacteristicsItem
–55 to +125°C
2.5 to 25V
33 to 560μF
±20% at 120Hz, 20°C
Less than or equal to the specified value at 120Hz, 20°C
Less than or equal to the specified value at 100kHz, 20°C
Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C
1 ESR should be measured at both of the terminal ends closest to the capacitor body.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
Dimensions
Type numbering system (Example : 2.5V 560μF)
Nichicon part number
5
6
(
0
&
1
-
7
&RQILJXUDWLRQ
/HDG)RUPLQJ
&RQWUROFRGH
&DSDFLWDQFHWROHUDQFH
5DWHGFDSDFLWDQFH)
5DWHGYROWDJH9
6HULHVQDPH
7\SH
FP
59Ap
561
2.5
/RW1R
3URGXFW/RJR
9ROWDJH
&DSDFLWDQFH
FPCAP part number
)3 5 5( 0 6 -7
&RQILJXUDWLRQ
/HDG)RUPLQJ
&RQWUROFRGH
&DSDFLWDQFHWROHUDQFH
&DSDFLWDQFH
)
9ROWDJH9
6HULHVQDPH
7\SH
(mm)
qD×L
6.3×5
6.3×6
qd
0.5
0.45
P
2.5
2.5
α
1.0
1.0
[q6.3×6]
Aluminum case
Stand off
Wire(Lead free)
φD
±0.5
MAX.
P
±0.5
L+α
MAX.
15
MIN.
4
MIN.
φd
[q6.3×5 / q6.3×6(-H)]
Aluminum case
Wire(Lead free)
φD
±0.5
MAX.
P
±0.5
L+α
MAX.
15
MIN.
4
MIN.
φd
Dimension table in next page.
Frequency coefficient of rated ripple current
Coefficient
Frequency
120 Hz 1 kHz 10 kHz 100 kHz
300 kHz
0.10 0.45 0.50 1.00 1.00
RS6
Miniature Sized, High Capacitance
Low ESR, High Capacitance, High ripple current.
Miniature Sized.
Load life of 2000 hours at 105°C.
Radial lead type : Lead free flow soldering condition
correspondence.
Compliant to the RoHS directive (2011/65/EU).
RS6
RNE
Higher
Capacitance