OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

XC2404A816UR-G

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16
4/16
XC2404A816UR-G
PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX.
UNITS CIRCUITS
Power Supply Pin Voltage V
DD
- 1.14 1.20 1.26 V ①
Current Circuit I
DD
V
DD
=1.2V 4.00 10.0 18 mA ①
PARAMETER SYMBOL CONDITIONS MIN. TYP. MAX.
UNITS CIRCUITS
Input Power Supply Voltage 1 V
IN1
R
BIAS
=270Ω±1％,
±200ppm/℃
2.850 3.000 3.150 V ①
Input Power Supply Voltage 2 V
IN2
R
BIAS
=240Ω±1％,
±200ppm/℃
2.708 2.850 2.992 V ①
Input Power Supply Voltage 3 V
IN3
R
BIAS
=82Ω±1％,
±200ppm/℃
1.710 1.800 1.890 V ①
Power Supply Pin Voltage V
DD
V
IN
= V
IN1
, V
IN2
, V
IN3
0.90 1.12 1.32 V ①
Current Circuit I
DD
V
IN
= V
IN1
, V
IN2
, V
IN3
5.25 7.25 11.0 mA ①
■
ELECTRICAL CHARACTERISTICS
●DC Characteristics
Fixed Bias (refer to TYPICAL APPLICATION CIRCUIT, Figure 1)
Ta= 25 ℃
Ta= 25 ℃
* When the device is used in self bias, please use the specified R
BIAS
and C
BIAS
.
Self Bias (refer to TYPICAL APPLICATION CIRCUIT, Figure 2)
5/16
XC2404A816UR-G
PARAMETER SYMBOL
CONDITIONS MIN. TYP. MAX. UNITS CIRCUITS
Power Gain S21 f=1.575GHz 24 26.5 - dB ②
Input Return Loss S11 f=1.575GHz - 10 -
dB
②
Output Return Loss S22 f=1.575GHz - 17 -
dB
②
Isolation S12 f=1.575GHz - -36 -
dB
②
Noise Figure
(*1)
NF f=1.575GHz - 0.9４ - dB ③
Input Power IP3 I
IP3
f=1.575GHz, 1.576GHz - -14.5 - dBm ④
Input Power @ 1dB
Gain Compression
P1dB f=1.575GHz - -25.5 - dBm ②
*1: NF is the value excluding the substrate loss.
V
DD
=1.2V, Ta=25℃
■
ELECTRICAL CHARACTERISTICS (Continued)
●
A
C Characteristics
Note
1. This series is structurally weak in electrostatic discharge.
Please eliminate static electricity from the operational table, people, and soldering iron.
2. Please use noiseless power supply for stable operation.
3. Please use ±1% Rbias with ±200ppm/℃ temperature stability and 10nF Cbias.
4. Please connect Cbias to V
DD
pin as close as possible.
5. Please refer to the pattern layout. V
DD
pins （V
DD1
, V
DD2
, V
DD3
） should be connected each other outside. Also, V
SS
pins （V
SS1
, V
SS2
,
V
SS3
） should be connected as well.
6. Please ensure to use an external component which does not depend on bias or temperature too much.
6/16
XC2404A816UR-G
XC2404
*1
■
TEST CIRCUITS
●Circuit ①（DC Characteristics: Power Supply Pin Voltage, Circuit Current, Input Power Supply Voltage）
●Circuit ②（Power Gain, Input Return Loss, Output Return Loss, Isolation, Input Power @ 1dB Gain Compression）
* Fixed Bias: Rbias=0Ω, V
IN
=V
DD
** Pin / Pout is 50Ω
*1: Refer to the circuit ⑤ for the block detail.
●Circuit ③（Noise Figure）
*1: Refer to the circuit ⑤ for the block detail.
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P16

XC2404A816UR-G

Mfr. #:
Buy XC2404A816UR-G
Manufacturer:
Torex Semiconductor
Description:
IC AMP GPS 1575.42MHZ USP-8A01
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet