10-2012, Rev. 1012
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
SCHRACK
General Purpose Relays
Force Guided Relays
n
6 pole relay with force guided contacts according to EN50205
n
DIN rail mounting
n
AC / DC input
Typical applications
contact monitoring in railway, elevator and machine controls
Approvals
relay SR6: VDE, UL, TUV, CQC
module SR6Z: CE
Technical data of approved types on request
Contact Data
Contact arrangement 3 form A (NO) and 3 form B (NC),
4 form A (NO) and 2 form B (NC),
5 form A (NO) and 1 form B (NC)
Rated voltage 250VAC
Max. switching voltage 250VAC
Rated current 8A
Contact material AgSnO
2,
Contact style single contact, force guided
type A according to EN 50205
Min. recommended contact load 5V, 10mA
Initial contact resistance ≤100mΩ at 1A, 24VDC
≤20Ω at 10mA, 5VDC
Frequency of operation, with/without load 6/150min
-1
Contact ratings, IEC60947-5-1,
on 1 form A (NO) contact AC15-5A
DC13-6A
Mechanical endurance 10x10
6
operations
Coil Data
Coil voltage range 6 to 115 VAC/VDC,
230VAC
DC energizing voltage U
rtd
6, 12, 18, 21, 24, 36, 40, 48, 60, 115VDC
AC/DC energizing voltage U
rtd
24, 115VAC/VDC
AC energizing voltage U
rtd
230VAC
Operative range 90 to 110% of U
rtd
Release voltage (+23°C) 10% of U
rtd
Max. coil power DC versions 1200mW
Max. system power AC/DC versions 2400mVA
Insulation Data
Initial dielectric strength
between open contacts 1000V
rms
between contact and coil 3000V
rms
between adjacent contacts 2000V
rms
Clearance/creepage
between open contacts microdisconnection
between contact and coil ≥5.5/5.5mm
between adjacent contacts ≥2,8 /2.8mm
Insulation to EN 50178, type of insulation
between contact and coil reinforced
between adjacent contacts basic
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
for mounting/handling 0 to 40°C
in operation -25 to 50°C
SR6ZC 730 only -25 to 40°C
Terminal type screwless clamp connectors
Wire cross section
solid wire 2.5mm
2
stranded wire 2.5mm
2
stranded wire with bootlace crimp 1.5mm
2
Mounting position any
Weight 90g
Packaging unit 2
Force Guided Relay on DIN-rail SR6 Z
F0238-C
54.0 mm (TS35)
58.0 mm (TS32)
66.5 mm (TS32) at SR6Z.730
62.5 mm (TS35) at SR6Z.730
Dimensions
S0423-A
Fit onto mounting rails according to
DIN EN 60175
Module width 46 mm
Module length 87 mm
