10
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9001 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN6104.5
February 12, 2014
ISL59110
Small Outline Transistor Plastic Packages (SC70-6)
D
e1
E
C
L
e
b
C
L
A2
A
A1
C
L
0.20 (0.008)
M
0.10 (0.004) C
C
-C-
SEATING
PLANE
123
456
E1
C
L
C
VIEW C
VIEW C
L
R1
R
4X θ1
4X θ1
GAUGE PLANE
L1
SEATING
α
L2
C
PLANE
c
BASE METAL
WITH
c1
b1
PLATING
b
P6.049A
6 LEAD SMALL OUTLINE TRANSISTOR PLASTIC PACKAGE
SYMBOL
INCHES MILLIMETERS
NOTESMIN MAX MIN MAX
A 0.031 0.039 0.80 1.00 -
A1 0.001 0.004 0.025 0.10 -
A2 0.034 0.036 0.85 0.90 -
b 0.006 0.012 0.15 0.30 -
b1 0.006 0.010 0.15 0.25 -
c 0.004 0.008 0.10 0.20 6
c1 0.004 0.006 0.10 0.15 6
D 0.073 0.085 1.85 2.15 3
E 0.084 BSC 2.1 BSC -
E1 0.045 0.053 1.15 1.35 3
e 0.0256 Ref 0.65 Ref -
e1 0.0512 Ref 1.30 Ref -
L 0.010 0.018 0.26 0.46 4
L1 0.016 Ref. 0.400 Ref. -
L2 0.006 BSC 0.15 BSC -
N6 65
R 0.004 - 0.10 - -
α
0° 8° 0° 8° -
Rev. 0 7/05
NOTES:
1. Dimensioning and tolerance per ASME Y14.5M-1994.
2. Package conforms to EIAJ SC70 and JEDEC MO203AB.
3. Dimensions D and E1 are exclusive of mold flash, protrusions,
or gate burrs.
4. Footlength L measured at reference to gauge plane.
5. “N” is the number of terminal positions.
6. These Dimensions apply to the flat section of the lead between
0.08mm and 0.15mm from the lead tip.
7. Controlling dimension: MILLIMETER. Converted inch dimen-
sions are for reference only
