1
FN6104.5
ISL59110
8MHz Rail-to-Rail Composite Video Driver
The ISL59110 is a single rail-to-rail 3-pole output
reconstruction filter with a -3dB roll-off frequency of 8MHz
and a slew rate of 40V/µs, with input signal DC restoration
accomplished with an internal sync tip clamp. Operating
from single supplies ranging from +2.5V to +3.6V and
sinking an ultra-low 2mA quiescent current, the ISL59110 is
ideally suited for low power, battery-operated applications. It
also features inputs capable of reaching down to 0.15V
below the negative rail. Additionally, an enable high pin shuts
the part down in under 14ns.
The ISL59110 is designed to meet the needs for very low
power and bandwidth required in battery-operated
communication, instrumentation and modern industrial
applications, such as video on demand, cable set-top boxes,
DVD players and HDTV. The ISL59110 is offered in a space-
saving SC-70 package guaranteed to a 1mm maximum
height constraint and specified for operation from -40°C to
+85°C temperature range.
Features
• 3rd order 8MHz reconstruction filter
• 40V/µs slew rate
• Low supply current = 2mA
• Power-down current less than 3µA
• Supplies from 2.5V to 3.6V
• Rail-to-rail output
• Input to 0.15V below V
S
-
• Input sync tip clamp
• SAG correction reduces AC coupling capacitor size
• RoHS compliant
Applications
• Video amplifiers
• Portable and handheld products
• Communications devices
• Video on demand
• Cable set-top boxes
• Satellite set-top boxes
• DVD players
• HDTV
• Personal video recorders
Pinout
ISL59110
(6 LD SC-70)*
TOP VIEW
Ordering Information
PART NUMBER
(Note 1)
PART
MARKING
(Note 2)
TAPE &
REEL
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL59110IEZ-T7 CNA 7” (3k pcs) 6 Ld SC-70 P6.049A
NOTES:
1. These Intersil Pb-free plastic packaged products employ special
Pb-free material sets, molding compounds/die attach materials,
and 100% matte tin plate plus anneal (e3 termination finish,
which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2. The part marking is located on the bottom of the part.
1
2
3
6
4
IN+
GND
SAG
VS+
OUT
5EN-
+
LPF
*1mm MAXIMUM HEIGHT GUARANTEED
Data Sheet February 12, 2014
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas LLC. 2005-2007, 2014. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.