https://www.phoenixcontact.com/us/products/1436754
12/14/2015Page4/5
Connector-SACC-MRD-4SC SH PN SCO-1436754
Approvals
Approval details
EAC
EAC
Drawings
Schematic diagram
Pin assignment M12 male connector, 4-pos., D-
coded, male side
Functional drawing
35
10
12
0,14 - 0,5 mm²
Ø 4 - 8 mm
0,8 Nm
20 mm
13
3 Nm
Slide the pressure nut and sleeve housing along the cable, strip the cable, shorten the shield, strip
the single wires, connect the wires, in the case of a straight sleeve housing gently twist the wires
together, stick the shielding foil around the shortened shield, in the case of a cable outside diameter
< 6 mm stick an additional shielding foil around the wire pack, screw the sleeve housing to the plug
insert, screw the pressure nut tight.
