Important notice
Dear Customer,
On 7 February 2017 the former NXP Standard Product business became a new company with the
tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS
semiconductors with its focus on the automotive, industrial, computing, consumer and wearable
application markets
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use
the references to Nexperia, as shown below.
Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/,
use http://www.nexperia.com
Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use
salesaddresses@nexperia.com (email)
Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on
the version, as shown below:
- © NXP N.V. (year). All rights reserved or © Koninklijke Philips Electronics N.V. (year). All rights
reserved
Should be replaced with:
- © Nexperia B.V. (year). All rights reserved.
If you have any questions related to the data sheet, please contact our nearest sales office via e-mail
or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and
understanding,
Kind regards,
Team Nexperia
1. General description
The 74HC4052-Q100; 74HCT4052-Q100 is a high-speed Si-gate CMOS device and is pin
compatible with Low-power Schottky TTL (LSTTL). The device is specified in compliance
with JEDEC standard no. 7A.
The 74HC4052-Q100; 74HCT4052-Q100 is a dual 4-channel analog
multiplexer/demultiplexer with common select logic. Each multiplexer has four
independent inputs/outputs (pins nY0 to nY3) and a common input/output (pin nZ). The
common channel select logics include two digital select inputs (pins S0 and S1) and an
active LOW enable input (pin E
). When pin E = LOW, one of the four switches is selected
(low-impedance ON-state) with pins S0 and S1. When pin E
= HIGH, all switches are in
the high-impedance OFF-state, independent of pins S0 and S1.
V
CC
and GND are the supply voltage pins for the digital control inputs (pins S0, S1 and E).
The V
CC
to GND ranges are 2.0 V to 10.0 V for the 74HC4052-Q100, and 4.5 V to 5.5 V
for the 74HCT4052-Q100. The analog inputs/outputs (pins nY0 to nY3 and nZ) can swing
between V
CC
as a positive limit and V
EE
as a negative limit. V
CC
V
EE
may not exceed
10.0 V. For operation as a digital multiplexer/demultiplexer, V
EE
is connected to GND
(typically ground).
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Wide analog input voltage range from 5 V to +5 V
Low ON resistance:
80 (typical) at V
CC
V
EE
=4.5V
70 (typical) at V
CC
V
EE
=6.0V
60 (typical) at V
CC
V
EE
=9.0V
Logic level translation: to enable 5 V logic to communicate with 5 V analog signals
Typical ‘break before make’ built-in
ESD protection:
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
CDM AEC-Q100-011 revision B exceeds 1000 V
Multiple package options
74HC4052-Q100; 74HCT4052-Q100
Dual 4-channel analog multiplexer/demultiplexer
Rev. 2 — 22 November 2012 Product data sheet
74HC_HCT4052_Q100 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 2 — 22 November 2012 2 of 26
NXP Semiconductors
74HC4052-Q100; 74HCT4052-Q100
Dual 4-channel analog multiplexer/demultiplexer
3. Applications
Analog multiplexing and demultiplexing
Digital multiplexing and demultiplexing
Signal gating
4. Ordering information
5. Functional diagram
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74HC4052D-Q100 40 C to +125 C SO16 plastic small outline package; 16 leads; body
width 3.9 mm
SOT109-1
74HCT4052D-Q100
74HC4052PW-Q100 40 C to +125 C TSSOP16 plastic thin shrink small outline package; 16 leads;
body width 4.4 mm
SOT403-1
74HCT4052PW-Q100
74HC4052BQ-Q100 40 C to +125 C DHVQFN16 plastic dual-in line compatible thermal enhanced
very thin quad flat package; no leads; 16 terminals;
body 2.5 3.5 0.85 mm
SOT763-1
74HCT4052BQ-Q100
Fig 1. Logic symbol Fig 2. IEC logic symbol
001aah824
1Z
13
S0
S1
E
10
9
6
2Z
3
2Y3
2Y2
2Y1
2Y0
1Y3
1Y2
1Y1
1Y0
4
2
5
1
11
15
14
12
001aah825
1
0
G4
MDX
0
3
4 ×
3
2
1
0
4
2
5
1
11
15
14
12
10
9
6
3
13

74HC4052BQ-Q100,11

Mfr. #:
Manufacturer:
Nexperia
Description:
Multiplexer Switch ICs 74HC4052BQ-Q100/DHVQFN16/REEL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union