B82144F2332K000

Inductors
RF chokes, LBC+ series B82144F2
SZ MAG PD IN/T April 2015
Please read Cautions and warnings and Page 4 of 9
Important notes at the end of this document.
Technical data and measuring conditions
Rated inductance L
R
Measured with LCR meter Agilent 4284A
or impedance analyzer Agilent 4294A
Measuring frequency: L
R
10 µH = 1 MHz
10 µH < L
R
470µH = 100 kHz
Measuring current: 1 mA
Measuring temperature: +20 ºC
Q factor Q
min
Measured with impedance analyzer Agilent 4294A, +20 °C
Rated temperature T
R
+40 °C
Rated current I
R
Maximum permissible DC current based on rated temperature
of +40 °C and component temperature of max. +125°C
Saturation current I
sat
Max. permissible DC with inductance decrease
L/L
0
of approx. 10%, at +20 ºC
DC resistance R
max
Measured at +20 ºC
Resonance frequency f
res,min
Measured with Agilent 4294A or 8753ES, +20 °C
Solderability (lead-free) Sn95.5Ag3.8Cu0.7: (+245 ±5) °C, (3 ±0.3) s
Wetting of soldering area: 90% (to IEC 60068-2-20, test Ta)
Resistance to soldering heat (+260 ±5)°C, 10 s (to IEC 60068-2-20, test Tb)
Tensile strength of leads 20 N (to IEC 60068-2-21, test Ua)
Climatic category 55/125/56 (to IEC 60068-1)
Storage conditions Mounted: –55 °C ... +125 °C
Packaged: –25 °C ... +40 °C, 75% RH
Weight Approx. 0.95 g
Mounting information:
When bending the leads, take care that the start-of-winding areas at the face ends (protected by
glue and lacquer) are not subjected to any mechanical stress.
Inductors
RF chokes, LBC+ series B82144F2
SZ MAG PD IN/T April 2015
Please read Cautions and warnings and Page 5 of 9
Important notes at the end of this document.
Characteristics and ordering codes
L
R
μH
Tolerance Q
min
f
Q
MHz
I
R
mA
I
sat
mA
R
max
Ω
f
res, min
MHz
Ordering code
1)
1.0
± 10%
K
50 2.52 4450 7700 0.043 200 B82144F2102K000
1.2 60 2.52 4250 7400 0.044 190 B82144F2122K000
1.5 60 2.52 4100 7200 0.045 170 B82144F2152K000
1.8 60 2.52 3750 6400 0.050 150 B82144F2182K000
2.2 60 2.52 3650 6000 0.055 140 B82144F2222K000
2.7 60 2.52 3550 5400 0.060 120 B82144F2272K000
3.3 60 2.52 3500 5000 0.065 100 B82144F2332K000
3.9 60 2.52 3350 4400 0.075 90 B82144F2392K000
4.7 50 2.52 3050 4000 0.080 70 B82144F2472K000
5.6 50 2.52 2950 3750 0.090 45 B82144F2562K000
6.8 50 2.52 2750 3500 0.095 40 B82144F2682K000
8.2 40 0.252 2650 3100 0.105 28 B82144F2822K000
10 40 0.252 2450 2850 0.120 22 B82144F2103K000
12 40 0.252 2400 2650 0.130 20 B82144F2123K000
15 50 0.252 2300 2400 0.140 13 B82144F2153K000
18 50 0.252 2200 2250 0.155 12 B82144F2183K000
22 50 0.252 2100 2000 0.175 10 B82144F2223K000
27 40 0.252 2000 1800 0.200 9.2 B82144F2273K000
33
± 5%
J
40 0.252
1900 1650 0.220 9.0 B82144F2333J000
39 40 0.252 1750 1500 0.250 8.5 B82144F2393J000
47 40 0.252 1700 1400 0.270 7.5 B82144F2473J000
56 40 0.0796 1600 1300 0.310 6.8 B82144F2563J000
68 40 0.0796 1500 1150 0.350 6.1 B82144F2683J000
82 40 0.0796 1400 1100 0.400 6.0 B82144F2823J000
100 40 0.0796 1300 950 0.460 5.4 B82144F2104J000
1)
For ammo pack the last digit has to be a “9”. Example: B82144F2223K009
Inductors
RF chokes, LBC+ series B82144F2
SZ MAG PD IN/T April 2015
Please read Cautions and warnings and Page 6 of 9
Important notes at the end of this document.
L
R
μH
Tolerance Q
min
f
Q
MHz
I
R
mA
I
sat
mA
R
max
Ω
f
res, min
MHz
Ordering code
1)
120
± 5%
J
40 0.0796 1100 850 0.600 4.6 B82144F2124J000
150 40 0.0796 1050 750 0.700 4.2 B82144F2154J000
180 40 0.0796 950 720 0.785 4.0 B82144F2184J000
220 40 0.0796 900 650 1.010 3.6 B82144F2224J000
270 40 0.0796 800 580 1.200 3.2 B82144F2274J000
330 40 0.0796 700 520 1.530 2.8 B82144F2334J000
390 40 0.0796 650 480 1.720 2.5 B82144F2394J000
470 40 0.0796 600 440 2.020 2.3 B82144F2474J000
1)
For ammo pack the last digit has to be a “9”. Example: B82144F2223K009

B82144F2332K000

Mfr. #:
Manufacturer:
EPCOS / TDK
Description:
Fixed Inductors 3.3uH 5000mA SatCurr=100MHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union