EV-ADE9153ASHIELDZ User Guide
UG-1253
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Te l: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
ADE9153A Energy Measurement Shield with mSure Autocalibration
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 8
FEATURES
Arduino-compatible, single-phase energy measurement
shield with the ADE9153A
Onboard shunt for line current measurement
Nominal current: 5 A
Maximum current: 10 A
Up to 240 V rms nominal line neutral voltage measurement
Arduino software library
mSure autocalibration and example application sketches
ADDITIONAL EQUIPMENT NEEDED
Arduino Uno, Arduino Zero, or equivalent
Voltage quick connect leads
USB micro cable
0.250 inch quick connect female connector
DOCUMENTS
ADE9153A data sheet
ADE9153A Technical Reference Manual
SOFTWARE
Arduino IDE 1.8.4 or later
ADE9153A library files
GENERAL DESCRIPTION
The EV-ADE9153ASHIELDZ is an Arduino shield compatible
with Arduino Uno, Arduino Zero, or ESP8266. The shield has
an on-board shunt resistor for line current measurement and
enables quick evaluation and prototyping of energy measurement
systems that use the ADE9153A. Arduino library and application
examples are provided on the ADE9153A product page to simplify
implementation of larger systems. Using mSure® autocalibration,
the shield can be calibrated to measure energy with 1% accuracy
over the dynamic range without the need for expensive calibration
equipment.
HAZARDOUS HIGH VOLTAGE CAUTION
The equipment described in this user guide is connected to
hazardous line voltages. Use proper caution when connecting the
sensors and voltage leads. Ensure that the system is enclosed in
a protective casing.
