RN-21
www.rovingnetworks.com
DS-RN21-V2 3/25/2010
809 University Avenue • Los Gatos, CA 95032 • Tel (408) 395-6539 • info@RovingNetworks.com
Class 1 Bluetooth® Module
Features
•
•
Supports Bluetooth 2.1/2.0/1.2/1.1 standards
•
•
Class1, up to 15dBm(RN21) (100meters)
•
•
Bluetooth v2.0+EDR support
•
•
Postage stamp sized module, 15.4mm x
22mm x 1.85mm
•
•
UART (SPP or HCI) and USB (HCI only) data
connection interfaces
•
•
Sustained SPP data rates - 240Kbps (slave),
300Kbps (master)
•
•
HCI data rates - 1.5Mbps sustained, 3.0Mbps
burst in HCI mode
•
•
8MB on board flash
•
•
HCI mode, or SPP/DUN software stacks
•
•
Embedded Bluetooth stack profiles (requires
no host stack): include GAP, SDP, RFCOMM
and L2CAP protocols, with SPP and DUN
profile support.
•
•
Secure and robust link, FHSS, 128 bit
encryption, error correction and guaranteed
packet delivery.
•
•
Built in software stack for auto-discovery,
auto-connect, and instant cable modes.
Applications
•
•
Cable replacement
•
•
Barcode scanners
•
•
Measurement and monitoring systems
•
•
Industrial sensors and controls
•
•
Medical devices
•
•
Asset tacking
Description
The RN21 Bluetooth module is perfect for embedded
applications where the Bluetooth radio must be
located within a chassis. The small form factor and
external antenna allow the RN21 to fit into many
diverse applications. The straightforward hardware
interface, castellated pads and complete software
stack provides makes it easy and reliable to design
into your end product. The RN21 provides a low
power, high performance Bluetooth module that
supports multiple protocols, including Enhanced Data
Rate (EDR). The RN21 is the solution for developers
needing to add wireless capability to their product but
can not afford to spend significant time and money
developing Bluetooth specific hardware and software.
CSR BlueCore-04
External
BALUN
PA
RF
Switch
Crystal
Flash
Memory
GND
VCC
USB
UART
PCM
PIO6
PIO5
PIO4