SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
G
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
FEATURES
3 code functions per position (n).
Self-cleaning twin point contacts.
UL94V-O materials used throughout.
Process compatible.
Crimped terminals for positive p.c.
board retention during installation.
MODEL NO. 0F A DIM. (MAX) B DIMENSION
NUMBER POS. (n) INCHES MM INCHES MM
TDS04 4 .557 14.14 .300 7.62
TDS08 8 .957 24.3 .700 17.78
TDS09 9 1.057 26.84 .800 20.32
TDS10 10 1.157 29.39 .900 22.86
MATERIALS
Base UL94V-O, glass fiber filled PBT, black
Cover UL94V-O, glass fiber filled PBT, black
Actuators UL94V-O, glass fiber filled Nylon, white
Contacts Gold over nickel over brass
Terminals 90/10 Solder plate over brass
PACKAGING
Normally supplied in standard IC tubes with all actuators
in the 'O' position
TDS SERIES SP 3 POSITION
3 STATE (+,0,-) DIP SWITCHES
G14
GENERAL SPECIFICATIONS
ELECTRICALS
Electrical life 2000 operations minimum per switch
Contact rating, non-switching 100 mA at 50 VDC
Contact rating, switching 25 mA at 24 VDC
Contact resistance
Initial:50
mΩ max. After 2000 operations:
100
mΩ max.
Insulation resistance 100 MΩ minimum between adjacent terms.at 500 VDC
Dielectric strength 500 VDC for 1 minute
Capacitance 5 pf. maximum
MECHANICALS, THERMALS
Mechanical life 2000 operations minimum per switch
Operating force 1000 grams maximum
Vibration 10-55-10 Hz./1 min. (3 planes) per MIL-STD-202F, METHOD 201A
Shock 50 G (peak value) for 11 msec. per MIL-STD-202F, METHOD 213B
Temperature range Operating and storage: -40°C to +85°C
SOLDERING RECOMMENDATIONS*
Hand soldering 320°C max. for 2 seconds max.(30 watt iron max.)
Wave soldering 260°C max. for 5 seconds
*For best results, keep actuator in 'O' position during soldering.
G01-G14 10/3/00, 3:51 AM14
