OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

JN5148/001M04T,534

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P23
Data Sheet: JN5148-001-Myy
JenNet, ZigBee PRO and IEEE802.15.4 Module
JN-DS-JN5148-001-Myy 1v4 © NXP Laboratories UK 2010
Overview Overview
Features: Module
• 2.4GHz IEEE802.15.4, JenNet and
ZigBee PRO compatible
• Sleep current (with active sleep
timer) 2.6µA
• JN5148-001-M00/03
up to 1km range (Ext antenna)
M00: integral antenna 18x32mm
M03: uFl connector 18x30mm
o TX power +2.5dBm
o Receiver sensitivity –95dBm
o TX current 15mA
o RX current 17.5mA
o 2.3-3.6V operation
• JN5148-001-M04
up to 4km range (Ext Antenna)
o 20dBm TX power
o Receiver sensitivity -98dBm
o uFl connector
o TX current 110mA
o RX current 23mA
o 18x41mm
o 2.7-3.6V operation
Features: Microcontroller
• 32-bit RISC CPU, up to 32MIPs with
low power
• 128kB ROM stores system code
• 128kB RAM stores system data and
bootloaded program code
• 4Mbit serial flash for program code
and data
• On chip OTP efuse
• JTAG debug interface
• 4-input 12-bit ADC, 2 12-bit DACs, 2
comparators
• 3 application timer/counters,
3 system timers
• 2 UARTs
• SPI port with 5 selects
• 2-wire serial interface
• 4-wire digital audio interface
• Watchdog timer
• Up to 21 DIO
Industrial temp (-40°C to +85°C)
Lead-free and RoHS compliant
The JN5148-001-Myy family is a range of ultra low power, high performance surface
mount modules targeted at JenNet and ZigBee PRO networking applications,
enabling users to realise products with minimum time to market and at the lowest
cost. They remove the need for expensive and lengthy development of custom RF
board designs and test suites. The modules use Jennic’s JN5148 wireless
microcontroller to provide a comprehensive solution with large memory, high CPU
and radio performance and all RF components included. All that is required to
develop and manufacture wireless control or sensing products is to connect a power
supply and peripherals such as switches, actuators and sensors, considerably
simplifying product development.
The JN5148-001-Myy family is a range of ultra low power, high performance surface
mount modules targeted at JenNet and ZigBee PRO networking applications,
enabling users to realise products with minimum time to market and at the lowest
cost. They remove the need for expensive and lengthy development of custom RF
board designs and test suites. The modules use Jennic’s JN5148 wireless
microcontroller to provide a comprehensive solution with large memory, high CPU
and radio performance and all RF components included. All that is required to
develop and manufacture wireless control or sensing products is to connect a power
supply and peripherals such as switches, actuators and sensors, considerably
simplifying product development.
Three module variants are available: JN5148-001-M00 with an integrated antenna,
JN5148-001-M03 with an antenna connector and the JN5148-001-M04 with an
antenna connector, power amplifier and LNA for extended range. The modules can
implement networking stacks such as JenNet and ZigBee PRO, as well as customer
applications
Three module variants are available: JN5148-001-M00 with an integrated antenna,
JN5148-001-M03 with an antenna connector and the JN5148-001-M04 with an
antenna connector, power amplifier and LNA for extended range. The modules can
implement networking stacks such as JenNet and ZigBee PRO, as well as customer
applications
Module Block Diagram Module Block Diagram
Timers
UARTs
12-bit ADC,
comparators
12-bit DACs,
temp sensor
2-wire serial
SPI
RAM
128kB
128-bit AES
Encryption
Accelerator
2.4GHz
Radio
ROM
128kB
RISC CPU
Power
Management
XTAL
O-QPSK
Modem
IEEE802.15.4
MAC
Accelerator
512kB Serial
Flash Memory
JN5148 chip
Power
Matching
uFl
Connector
Matching
Integrated Antenna
Matching
uFl
Connector
PA / LNA
External
Antenna
M00 Option
M03 Option
M04 Option
4-Wire Audio
Sleep Counters
32-byte
OTP eFuse
Watchdog timer
Time of Flight
Engine
Benefits
•
Microminiature module solutions
•
Ready to use in products
•
Minimises product development
time
•
No RF test required for systems
•
Compliant with FCC part 15
rules, IC Canada RSS 210e,
ETSI EN 300-328 and Japan
ARIB STD-T66
Applications
•
Robust and secure low power
wireless applications
•
ZigBee PRO and JenNet
networks
•
Home and commercial building
automation
•
Utilities metering (e.g. AMR)
•
Location Aware services (e.g.
Asset Tracking)
•
Toys and gaming peripherals
•
Industrial systems
•
Telemetry
•
Remote Control
Contents
1. Introduction 3
1.1. Variants 3
1.2. Regulatory Approvals 3
2. Specifications 4
3. Product Development 5
3.1. JN5148 Single Chip Wireless Microcontroller 5
4. Pin Configurations 6
4.1. Pin Assignment 7
4.2. Pin Descriptions 8
4.2.1 Power Supplies 8
4.2.2 SPI Memory Connections 8
5. Electrical Characteristics 9
5.1. Maximum Ratings 9
5.2. Operating Conditions 9
Appendix A Additional Information 10
A.1 Outline Drawing 10
A.2 Module PCB Footprint 13
A.3 Manufacturing 14
A.3.1 Reflow Profile 14
A.3.2 Soldering Paste and Cleaning 14
A.4 Ordering Information 15
A.5 Tape and Reel Information: 16
A.5.1 Tape Orientation and dimensions 16
A.5.2 Cover tape details 16
A.5.3 Leader and Trailer 17
A.5.4 Reel Dimensions: 17
A.6 Related Documents 17
A.7 Federal Communication Commission Interference Statement 18
A.7.1 Antennas approved by FCC for use with JN5148 modules 19
A.7.2 High Power Module usage limitation 20
A.7.3 High Power Module channel restriction 20
A.7.4 FCC End Product Labelling 20
A.8 Industry Canada Statement 20
A.8.1 Industry Canada End Product Labelling 20
A.9 European R & TTE Directive 1999/5/EC Statement 21
A.10 RoHS Compliance 22
A.11 Status Information 22
A.12 Disclaimers 22
Version Control 23
ii JN-DS-JN5148-001-Myy 1v4 © NXP Laboratories UK 2010
1. Introduction
The JN5148-001-Myy module family provides designers with a ready made component that provides a fully
integrated solution for applications, using the IEEE802.15.4 standard in the 2.4-2.5GHz ISM frequency band [1],
including JenNet and ZigBee PRO, and can be quickly and easily included in product designs. The modules
integrate all of the RF components required, removing the need to perform expensive RF design and test. Products
can be designed by simply connecting sensors and switches to the module IO pins. The modules use Jennic’s single
chip IEEE802.15.4 Wireless Microcontroller, allowing designers to make use of the extensive chip development
support material. Hence, this range of modules allows designers to bring wireless applications to market in the
minimum time with significantly reduced development effort and cost.
Three variants are available: JN5148-001-M00 (standard module with integral antenna), JN5148-001-M03 (standard
module with uFl connector for use with external antennae) and JN5148-001-M04 (high RF power with uFL connector,
improved sensitivity module for evaluation of extended range applications). All modules have FCC modular
approvals and are compliant with EU regulations. The variants available are described below.
1.1. Variants
Variant Description FCCID Industry Canada ID
JN5148-001-M00 Standard Power, integrated antenna TYOJN5148M0 IC: 7438A-CYO5148M0
JN5148-001-M03 Standard Power, uFl connector TYOJN5148M3 IC: 7438A-CYO5148M3
JN5148-001-M04 High Power, uFl connector TYOJN5148M4 IC: 7438A-CYO5148M4
1.2. Regulatory Approvals
All module types have been tested against the requirements of European standard ETS 300 328 v1.7.1 and a
Notified Body statement of opinion for this standard is available on request. The High Power module with M04 suffix
is approved for use in Europe with reduced output power: +10dBm EIRP is the maximum permitted in Europe.
Additionally, all module types have received FCC “Modular Approvals”, in compliance with CFR 47 FCC part 15
regulations and in accordance to FCC Public notice DA00-1407, appendix
A.7 contains details on the conditions
applying to this modular approval. The modules are approved for use with a range of different antennas; further
details of which can be found in section Appendix A.6.1. The modular approvals notice and test reports are available
on request.
The high power module variant is classified as ‘mobile’ device pursuant with FCC § 2.1091 and must not be used at a
distance of less than 20 cm (8”) from any person.
In addition, all modules have Industry Canada modular approval and RSS210e Issue 7 (June 2007) certification.
© NXP Laboratories UK 2010 JN-DS-JN5148-001-Myy 1v4 3
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18P19-P21P22-P23

JN5148/001M04T,534

Mfr. #:
Buy JN5148/001M04T,534
Manufacturer:
NXP Semiconductors
Description:
RF TXRX MODULE 802.15.4 U.FL ANT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet