3
SY88933V
Micrel, Inc.
M9999-011508
hbwhelp@micrel.com or (408) 955-1690
Absolute Maximum Ratings
(Note 1)
Supply Voltage (V
CC
) ....................................... 0V to +7.0V
Input Voltage (D
IN
,
/D
IN
) .........................................0 to V
CC
Output Current (I
OUT
)
Continuous .............................................................50mA
Surge....................................................................100mA
EN Voltage .............................................................0 to V
CC
V
REF
Current ......................................... –800µA to +500µA
SD
LVL
Voltage ................................................. V
REF
to V
CC
Storage Temperature (T
S
) ....................... –55°C to +125°C
Operating Ratings
(Note 2)
Supply Voltage (V
CC
) .............................. +3.0V to +3.6V or
............................................................ +4.5V to +5.5V
Ambient Temperature (T
A
), Note 3 ............ –40°C to +85°C
Junction Temperature (T
J
), Note 3 .......... –40°C to +120°C
Package Thermal Resistance
MSOP
(θ
JA
) Still-Air ..................................................113°C/W
V
CC
= 3.0V to 3.6V or 4.5V to 5.5V; R
LOAD
= 50Ω to V
CC
–2V; T
A
= –40°C to +85°C; typical values at V
CC
= 3.3V, T
A
= 25°C.
Symbol Parameter Condition Min Typ Max Units
I
CC
Power Supply Current No output load 22 42 mA
SD
LVL
SD
LVL
Voltage V
REF
V
CC
V
V
IH
EN Input HIGH Voltage 2.0 V
V
IL
EN Input LOW Voltage 0.8 V
I
IH
EN Input HIGH Current V
IN
= 2.7V 20 µA
V
IN
= V
CC
100 µA
I
IL
EN Input LOW Current V
IN
= 0.5V –0.3 mA
V
OH
SD Output HIGH Level V
CC
≥ 3.3V 2.4 V
V
CC
< 3.3V 2.0 V
V
OL
SD Output LOW Level I
OL
= +2mA 0.5 V
V
OH
PECL Output HIGH Voltage 50Ω to V
CC
–2V output load V
CC
–1.085 V
CC
–0.955 V
CC
–0.880 V
V
OL
PECL Output LOW Voltage 50Ω to V
CC
–2V output load V
CC
–1.830 V
CC
–1.705 V
CC
–1.555 V
V
OFFSET
Differential Output Offset ±160 mV
V
IHCMR
Common Mode Range Note 1 GND +2.0 V
CC
V
V
REF
Reference Voltage Note 2 V
CC
–1.38 V
CC
–1.32 V
CC
–1.26 V
Note 1. The V
IHCMR
range is referenced to the most positive side of the differential input signal.
Note 2. The current provided into or from V
REF
must be limited to 800µA source and 500µA sink.
DC ELECTRICAL CHARACTERISTICS
Note 1. Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is
not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM RATlNG
conditions for extended periods may affect device reliability.
Note 2. The data sheet limits are not guaranteed if the device is operated beyond the operating ratings.
Note 3. Commercial devices are guaranteed from 0°C to +85°C ambient temperature.
