SPECIFICATION
PS-35-3.3
PS-35-5 PS-35-7.5
PS-35-12
PS-35-13.5
PS-35-15
PS-35-24 PS-35-48
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY(Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVER LOAD
AC CURRENT (Typ.)
3.3V
5V 7.5V
12V
13.5V
15V
24V 48V
6A
6A 4.7A
3A
2.6A
2.4A
1.5A 0.75A
0 ~ 6A
0 ~ 6A 0 ~ 4.7A
0 ~ 3A
0 ~ 2.6A
0 ~ 2.4A
0 ~ 1.5A 0 ~ 0.75A
19.8W
30W 35.25W
36W
35.1W
36W
36W 36W
80mVp-p
100mVp-p
100mVp-p
120mVp-p
120mVp-p 150mVp-p 200mVp-p
240mVp-p
3.14 ~ 3.63V
4.75 ~ 5.5V
7.13 ~ 8.25V
10.8 ~ 13.2V
12.15 ~ 14.85V 13.5 ~ 16.5V 21.6 ~ 26.4V
43.2 ~ 52.8V
±2.0%
±2.0%
±0.5%
±0.5%
±1%
±1%
1200ms, 30ms/230VAC,1200ms,30ms/115VAC at full load
50ms/230VAC,10ms/115VAC at full load
90 ~ 264VAC 127 ~370VDC
47 ~ 440Hz
70%
78%
80%
81%
81%
81%
85%
84%
0.75A/115VAC 0.5A/230VAC
COLD START 23A/115VAC 45A/230VAC
<2mA / 240VAC
105 ~ 150% 105 ~ 160%rated output power (3.3V: rated output power)
Protection type : shut down O/P voltage,re-power on to recover
-20 ~ +65 (Refer to output load derating curve)℃
20 ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH℃
±℃ ℃0.05%/ (0 ~ 50 )
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
101.6*50.8*24mm (L*W*H)
3.8 ~ 4.95V
5.75 ~ 6.75V
8.63 ~ 10.5V
13.8 ~ 16.2V
15.5 ~ 18.2V
17.25 ~ 20.25V
27.6 ~ 32.4V
55.2 ~ 62.4V
OVER VOLTAGE
SAFETY STANDARDS
HARMONIC CURRENT
EMS IMMUNITY
UL60950-1, TUV EN60950-1 Approved
Compliance to EN55032 (CISPR32) Class B
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
35W Single Output Switching Power Supply
Universal AC input/Full range
Protections:Short circuit/Over load/Over voltage
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 60KHz
2 years warranty
■
Features :
PS-35 series
ENVIRONMENT
SAFETY &
EMC
(Note 4)
PROTECTION
EMI CONDUCTION & RADIATION
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC I/P-FG:2.0KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
±2.0%
±0.5%
±1%
±1.0%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
0.124Kg;96PCS/12.9Kg/0.8CUFT
588.8Khrs
File Name:PS-35-SPEC 2017-07-07
..
