1
01-2015, Rev. 0115
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Force Guided Relays
Force Guided Relay SR6 D/M
n
4 pole relay with force guided contacts according to EN 50205
n
High insulation distances between electrical circuits
Typical applications
Emergency shut-off, press control, machine control, elevator and escalator
control, safety relays.
Approvals
VDE Cert. No. 128935, UL E214025, TUV 968/EL 350
Technical data of approved types on request.
Contact Data
Contact arrangement 3 form A + 1 form B contacts
3 NO + 1 NC,
2 form A + 2 form B contacts
2 NO + 2 NC
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 8A
Contact material AgSnO
2
Contact style single contact, force guided
type A according to EN 50205
Min. recommended contact load 5V, 10mA
Initial contact resistance ≤100mΩ at 1A, 24VDC
≤20Ω at 10mA, 5VDC
Frequency of operation, with/without load 6/150min
-1
Contact ratings, IEC60947-5-1,
on 1 form A (NO) contact AC15-5A
DC13-6A
Mechanical endurance 10x10
6
operations
Coil data
Coil voltage range 5 to 110VDC
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%
1)
mW
005 5 3.8 0.5 21 1190
006 6 4.5 0.6 30 1200
009 9 6.8 0.9 68 1191
012 12 9 1.2 120 1200
018 18 13.5 1.8 270 1200
021 21 16 2.1 368 1198
Coil Data (continued)
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10%
1)
mW
024 24 18 2.4 480 1200
036 36 27 3.6 1080 1200
040 40 30 4.0 1333 1200
048 48 36 4.8 1920 1200
060 60 45 6 3000
1)
1200
110 110 83 11 10080
1)
1200
1)
Coil resistance ±12%.
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts 1500V
rms
between contact and coil 4000V
rms
between adjacent contacts 3000V
rms
in longitudinal direction 4000V
rms
Clearance/creepage
between open contacts microdisconnection
between contact and coil ≥5.5/5.5mm
between adjacent contacts ≥5.5/5.5mm
in longitudinal direction ≥15/15mm
Insulation to EN 50178, type of insulation
between contact and coil reinforced
between adjacent contacts reinforced
F0206-ED
