CD45-B2GA101K-VKA

February 2016
CAPACITORS
Type: CD45 [SL, B, E characteristics, Eac: X1=440V, Y1=400V]
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors
CD45 series
Commercial Grade, Safety Standard Approved
(2/9)
20160219 / leaddisc_commercial_cd45_en.fm
CAPACITORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
Please refer to the guideline of notabilia for fixed ceramic capacitors issued by JEITA(Japan Electronics and Information Technology
Association, EIAJ RCR-2335).
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
REMINDERS
(3/9)
20160219 / leaddisc_commercial_cd45_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
CAPACITORS
Disc Type Capacitors with Lead
High Voltage Ceramic Capacitors, Commercial Grade, Safety Standard Approved
FEATURES
Compliant with IEC and the safety standards of various countries.
This ceramic capacitor meets reinforced insulation's Safety Standards.
Since it is rated at a withstand voltage of AC.4000V, it can be used in single-unit configurations within European Class II devices.
Flame-resistant reinforced outer insulation prevents fires, electrical shock, and other potential hazards.
These products shall conform to RoHS Directive due to lead(Pb) free of lead wire and internal solder material.
Compatible with halogen-free external resin coating.
APPLICATION
For use in Y capacitor for AC adapter, charger, power supplies
PART NUMBER CONSTRUCTION
Please refer to P-6 8 about the product dimensions.
OPERATING TEMPERATURE RANGE

The maximum operating temperature of 125°C includes capacitor self-generated heat of up to 20°C.

The storage temperature range applies to after MLCC is mounted on board.
Overview of CD45 Series
CD45 - E 2GA 102 M -
KA
Series name
Temperature
characteristics
Rated voltage
Nominal
capacitance
Capacitance
tolerance
Lead type
Application
classification
Internal code
SL
+350 to
–1000ppm/°C
2GA
X1: 440V
Y1: 400V
100 10pF J ±5% G Long lead
K
Safety
standard
A Halogen-free
102 1,000pF K ±10% N Short lead
B ±10% 222 2,200pF M ±20% V Taping
E +20, –55%
Temperature
characteristics
Temperature range
Operating temperature
°C
Storage temperature

°C
SL –25 to +125 –25 to +125
B –25 to +125 –25 to +125
E 25 to +125 –25 to +125
Product compatible with RoHS directive
Halogen-free
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.

CD45-B2GA101K-VKA

Mfr. #:
Manufacturer:
TDK
Description:
Safety Capacitors D: 6.5mm X1/Y1 100pF B 10% LS:10mm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union