Page 13 of 23
8.Optical Characteristics
The optic
al characteristics are measured under stable conditions as following notes.
Table 2 Optical Characteristics
Specifica
tion
Item Conditio
ns
Min. Typ. Max. Note
Left -- 70 - Ho
rizontal
Right -- 70 -
Up -- 60 -
V
iewing Angle [degrees]
K=Contrast Ratio>10
Vertical
Down -- 70 -
A,B
Contrast ratio Center -- 600 -- A,C
Resp
onse Time [ms] Rising + Falling - 3+5 16 A,D
Red x 0.5
8 0.63 0.68 A,
Red y
0.26 0.31 0.36 A,
G
reen x 0.224 0.295 0.344 A,
G
reen y 0.468 0.518 0.568 A,
Blue
x 0.093 0.143 0.193 A,
Blue
y 0.101 0.153 0.201 A,
White
x 0.245 0.295 0.345 A,
Col
or Chromaticity
(CIE1931)
White y 0.281 0.331 0.381 A,
White
Luminance [cd/m^2] I-LED=20.0mA
- 200 -
5point
A, E
- - - Lu
minance Uniformity [%] I-LED=20.0mA 13points
I-LED=20.0mA 5points
80 - -
A, F
（Note: Ba
cklight is M-BL-101-009V0）
Note:
A. Measur
ement Setup
The LCD module should be stabilized at given temperature for 15 minutes to avoid
abrupt temperature change during measuring. In order to stabilize the luminance, the
measurement should be executed after lighting backlight for 15 minutes in a windless
room.
