4
HER Low Current
Device Series Test
HDSP- Parameter Symbol Min. Typ. Max. Units Conditions
315/316L Luminous Intensity/Segment
[1,2]
I
V
180 370 µcd I
F
= 2 mA
(Digit Average)
Forward Voltage/Segment or DP V
F
2.1 2.5 V I
F
= 2 mA
Peak Wavelength λ
PEAK
635 nm
Dominant Wavelength
[3]
λ
d
626 nm
Reverse Voltage/Segment or DP
[4]
V
R
3 30 V I
R
= 100 µA
Thermal Resistance LED Rθ
J-PIN
200 °C/W/Seg
Junction-to-Pin
Yellow
Device Series Test
HDSP- Parameter Symbol Min. Typ. Max. Units Conditions
316Y Luminous Intensity/Segment
[1,2]
I
V
450 1800 µcd I
F
= 10 mA
(Digit Average)
Forward Voltage/Segment or DP V
F
2.0 2.5 V I
F
= 10 mA
Peak Wavelength λ
PEAK
583 nm
Dominant Wavelength
[3]
λ
d
586 nm
Reverse Voltage/Segment or DP
[4]
V
R
3 50 V I
R
= 100 µA
Thermal Resistance LED Rθ
J-PIN
200 °C/W/Seg
Junction-to-Pin
Green
Device Series Test
HDSP- Parameter Symbol Min. Typ. Max. Units Conditions
315/316G Luminous Intensity/Segment
[1,2]
I
V
450 5000 µcd I
F
= 10 mA
(Digit Average)
Forward Voltage/Segment or DP V
F
2.1 2.5 V I
F
= 10 mA
Peak Wavelength λ
PEAK
566 nm
Dominant Wavelength
[3]
λ
d
571 nm
Reverse Voltage/Segment or DP
[4]
V
R
3 50 V I
R
= 100 µA
Thermal Resistance LED Rθ
J-PIN
200 °C/W/Seg
Junction-to-Pin
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λ is derived from the CIE chromaticity diagram and is that single wavelength which denes the color of the device.
4. Typical specication for reference only. Do not exceed absolute maximum ratings.